[mythtv-users] Issue with the default sound volume on my PVR-150
rage321 at optonline.net
rage321 at optonline.net
Wed May 9 20:18:17 UTC 2007
Thanks for the reply. I looked there, but didn't see an option for Audio, only the Tuner which I set to S-Video. This is using the MPEG-2 Encoder Card (PVR-X50, PVR-500) option. Any other ideas i can try?----- Original Message -----From: "Michael T. Dean" Date: Wednesday, May 9, 2007 11:18 amSubject: Re: [mythtv-users] Issue with the default sound volume on my PVR-150To: Discussion about mythtv > On 05/08/2007 06:23 PM, Rage321 wrote:> >> > When I first installed my PVR-150, everyone was more or less > good to > > go. I noticed that during playback my recordings would have a > > noticeable hissing sound that I couldn't figure out how to get > rid of. > > After a couple of days googling, I figured out that the > problem was > > that Myth was resetting any volume settings I had set for the > PVR-150, > > (v4l2-ctl –set-ctrl=volume=63500), and using one much lower. > Once I > > started recording I would run v4l2-ctl –set-ctrl=volume=63500 > and > > everything would be fine with that specific recording. Audio > playback > > was great. No more noticeable hissing until Myth tried to > recording > > something else when it would reset the volume again.> >> > I created the following cronjob...> >> > * * * * * /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 5; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 10; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 15; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 20; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 25; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 30; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 35; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 40; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 45; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 50; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> > * * * * * /bin/sleep 55; /usr/bin/v4l2-ctl –set-ctrl=volume=63500> >> > …which resets the volume to what I want every 5 seconds.> >> > To me, this is a band aid and am coming here to see if someone > else > > has a better solution for me.> >> > You could set the volume in mythtv-setup's capture card settings > to the > proper volume...> > Mike> _______________________________________________> mythtv-users mailing list> mythtv-users at mythtv.org> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070509/efb4b680/attachment.htm
More information about the mythtv-users
mailing list