[mythtv-users] pvr-150 ir receiver
Francis
fnitram at gmail.com
Tue May 29 09:03:08 UTC 2007
Thanks Groepaz and Daniel for your help, I tried both of your suggestion
(except compiling the lirc module into the kernel, which I really don't how
to do that), but none have worked.
I have seen the following line from other people messages log file:
ivtv0: i2c attach to card #0 ok [client=Hauppauge IR (PVR150), addr=71]
but in my messages log file this line doesn't appear anywhere, here its
content, I did just include the stuff from lirc and ivtv:
May 29 01:48:03 localhost kernel: lirc_dev: no version for "struct_module"
found: kernel tainted.
May 29 01:48:03 localhost kernel: lirc_dev: IR Remote Control driver
registered, at major 61
May 29 01:48:03 localhost kernel:
/var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c:
Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3
May 29 01:48:03 localhost kernel:
/var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c:
Venky Raju <dev at venky.ws>
May 29 01:48:03 localhost kernel:
/var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c:
imon_probe: found IMON device
May 29 01:48:03 localhost kernel: lirc_dev: lirc_register_plugin:
sample_rate: 0
May 29 01:48:03 localhost kernel:
/var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c:
imon_probe: Registered iMON plugin (minor:0)
May 29 01:48:03 localhost kernel:
/var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c:
imon_probe: iMON device on usb<4:2> initialized
May 29 01:48:03 localhost kernel: ivtv: ==================== START INIT
IVTV ====================
May 29 01:48:03 localhost kernel: ivtv: version 0.10.2 (tagged release)
loading
May 29 01:48:03 localhost kernel: ivtv: Linux version:
2.6.20-1.2944.fc6SMP mod_unload 686 4KSTACKS
May 29 01:48:03 localhost kernel: ivtv: In case of problems please include
the debug info between
May 29 01:48:03 localhost kernel: ivtv: the START INIT IVTV and END INIT
IVTV lines, along with
May 29 01:48:03 localhost kernel: ivtv: any module options, when mailing
the ivtv-users mailinglist.
May 29 01:48:03 localhost kernel: ivtv0: Autodetected Hauppauge card
(cx23416 based)
May 29 01:48:03 localhost kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI
21 (level, low) -> IRQ 20
May 29 01:48:03 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type
0
May 29 01:48:03 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware
(376836 bytes)
May 29 01:48:03 localhost kernel: Floppy drive(s): fd0 is 1.44M
May 29 01:48:03 localhost kernel: FDC 0 is a post-1991 82077
May 29 01:48:03 localhost kernel: ivtv0: Encoder revision: 0x02060039
May 29 01:48:03 localhost kernel: tveeprom 0-0050: Hauppauge model 26132,
rev F1B2, serial# 10258655
May 29 01:48:03 localhost kernel: tveeprom 0-0050: tuner model is TCL
M2523_5N_E (idx 112, type 50)
May 29 01:48:03 localhost kernel: tveeprom 0-0050: TV standards NTSC(M)
(eeprom 0x08)
May 29 01:48:03 localhost kernel: tveeprom 0-0050: audio processor is
CX25841 (idx 35)
May 29 01:48:03 localhost kernel: tveeprom 0-0050: decoder processor is
CX25841 (idx 28)
May 29 01:48:03 localhost kernel: tveeprom 0-0050: has no radio, has IR
receiver, has IR transmitter
May 29 01:48:03 localhost kernel: ivtv0: Autodetected Hauppauge WinTV
PVR-150
May 29 01:48:03 localhost kernel: ivtv0: reopen i2c bus for IR-blaster
support
May 29 01:48:03 localhost kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i2c
driver #0)
May 29 01:48:03 localhost kernel: cx25840 0-0044: cx25841-23 found @ 0x88
(ivtv i2c driver #0)
May 29 01:48:03 localhost kernel: cx25840 0-0044: loaded
v4l-cx25840.fwfirmware (16382 bytes)
May 29 01:48:03 localhost kernel: wm8775 0-001b: chip found @ 0x36 (ivtv i2c
driver #0)
May 29 01:48:03 localhost kernel: ivtv0: Registered device video0 for
encoder MPEG (4 MB)
May 29 01:48:03 localhost kernel: ivtv0: Registered device video32 for
encoder YUV (2 MB)
May 29 01:48:03 localhost kernel: ivtv0: Registered device vbi0 for encoder
VBI (1 MB)
May 29 01:48:03 localhost kernel: ivtv0: Registered device video24 for
encoder PCM audio (1 MB)
May 29 01:48:03 localhost kernel: tuner 0-0061: type set to 50 (TCL 2002N)
May 29 01:48:03 localhost kernel: ivtv0: Initialized Hauppauge WinTV
PVR-150, card #0
May 29 01:48:03 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI
17 (level, low) -> IRQ 21
May 29 01:48:03 localhost kernel: ivtv: ==================== END INIT
IVTV ====================
May 29 01:48:23 localhost kernel: bttv: driver version 0.9.16 loaded
May 29 01:48:23 localhost kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
May 29 01:48:23 localhost kernel: cx2388x v4l2 driver version 0.0.6 loaded
May 29 01:48:23 localhost kernel: lirc_i2c: chip found @ 0x71 (Hauppauge IR
(PVR150))
May 29 01:48:23 localhost kernel: lirc_dev: lirc_register_plugin:
sample_rate: 10
May 29 01:48:23 localhost lircd-0.8.2-CVS[2941]: lircd(userspace) ready
May 29 01:48:23 localhost lircd-0.8.2-CVS[2941]: accepted new client on
/dev/lircd
May 29 01:48:23 localhost kernel:
/var/tmp/bach-build/BUILD/lirc-0.8.2/drivers/lirc_imon/lirc_imon.c:
IR port opened
thanks
2007/5/29, Daniel Agar <daniel at agar.ca>:
>
> > Hello I have tried for countless hours to make the ir receiver of the
> > pvr-150 to work, I have the one that come with a irblaster, but this is
> > not
> > a must for this one to work because I have a serial irblaster and anyway
> I
> > would need to patch the lirc if I want it to work, which is beyond my
> > knowledge right now .
> >
> > Everything seems to load correctly but I got nothing on the console when
> I
> > start irw and press a button on my remote ( I know the card/ir
> > receiver/remote works, i tried them on windows).
> >
> > By the way I try to install it on MythDora 4
> >
> > Any help would be extremely appreciated.
> >
> > Here is the contents of my files
> > ----------------
> > /etc/modprobe.conf:
> >
> > alias char-major-61-0 lirc_i2c
> > alias char-major-61-1 lirc_serial
> > options lirc_serial irq=4 io=0x3f8
> > ####IR setup####
> > install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
> > lirc_i2c
> > install lirc_serial setserial /dev/ttyS0 uart none; /sbin/modprobe
> > --ignore-install lirc_serial
> >
> > ----------------
> > /etc/rc.d/rc.local
> >
> > /sbin/modprobe lirc_i2c
> > /sbin/modprobe lirc_serial
> > /usr/sbin/lircd --device=/dev/lirc0 --output=/dev/lircd
> > /usr/sbin/lircd --driver=default --device=/dev/lirc1
> --output=/dev/lircd1
> > --pidfile=/var/run/lircd1.pid
> >
> > ------------------
> >
> > /etc/lircd.conf
> >
> > in this file I have the grayHauppauge remote and my cable box, I don't
> > think
> > I need to post it.
> >
> > ------------------
> >
> > /etc/sysconfig/lircd
> >
> > #Options to lircd
> > LIRCD_OPTIONS=
> >
> > ------------------
> >
> > here is the list of currently loaded lirc modules:
> >
> > lsmod | grep lirc
> >
> > lirc_serial 15104 0
> > lirc_i2c 11780 0
> > i2c_core 24897 11
> >
> cx88xx,bttv,lirc_i2c,i2c_ec,wm8775,cx25840,tuner,nvidia,ivtv,i2c_algo_bit,tveeprom
> > lirc_imon 17924 1
> > lirc_dev 16292 3 lirc_serial,lirc_i2c,lirc_imon
> >
> > --------------------
> >
> > and here is the lirc devices
> >
> > ls -l /dev/lirc*
> >
> > lrwxrwxrwx 1 root root 5 May 28 18:46 /dev/lirc -> lirc0
> > crw------- 1 root root 61, 0 May 28 18:46 /dev/lirc0
> > crw------- 1 root root 61, 1 May 28 18:46 /dev/lirc1
> > crw------- 1 root root 61, 2 May 28 18:46 /dev/lirc2
> > srw-rw-rw- 1 root root 0 May 28 18:46 /dev/lircd
> > srw-rw-rw- 1 root root 0 May 28 18:46 /dev/lircd1
> > prw-r--r-- 1 root root 0 May 28 18:46 /dev/lircm
> >
> > Thanks
>
> I use fc6 with a pvr 150 and IR. I don't have anything in
> /etc/modprobe.conf concerning lirc and I don't have fedora start lircd on
> its own. I simply have the following in /etc/rc.local
>
> modprobe lirc_i2c
> /etc/init.d/lircd start
>
> You might try using this, and you could simply have the /dev/lirc symlink
> point to the proper ir device. I don't have any options in my
> /etc/sysconfig/lircd file.
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20070529/de9369a2/attachment.htm
More information about the mythtv-users
mailing list