[mythtv-users] cx88-blackbird & avermedia M150-D
starz909 at yahoo.com
Thu Oct 18 23:22:07 UTC 2007
I actually do need the latest v4l drivers. My 1st
card is a DVICO FusionHDTV5 RT, a conexant card, and
which is only supported in the latest repositories.
Perhaps, instead, the mythtv developers might be
persuaded to update their support for blackbird cards?
As far as I know that's my only solution. From my
perspective, the mythtv software is all that's holding
my system back.
On Thursday 18 October 2007 18:04:28 you wrote:
> One, the cx88-blackbird (from v4l repo) driver no
> longer recognizes the old firmware file, so the
> instructions for pulling the firmware from windows
> drivers no longer applies. It will only accept the
> new firmware file that the IVTV developers provide.
> don't know if that's a good thing or not since
> no documentation as to whether it works with drivers
> besides the IVTV drivers. I did successfully
> an mpeg2 stream as was stated in my previous email,
> I don't think there's a driver or firmware problem.
In principle, this sounds fine; however, as stated in
the wiki entry
wrote), the configuration seems rather finicky, as
> Two, the instructions say to configure it as an
> Hardware encoder card. So I do, and when I go to
> mythtv to watch the result, I get a black screen, no
> audio, and mythfrontend is unresponsive for the rest
> of the session.
This sounds like the freezing problem I described in
the wiki, although
don't recall it happening except after a channel
change. (It's been a
since I mucked with the configuration, though, so I
might not be
Overall, I'd suggest using a 2.6.19 kernel and its
described in the wiki entry. This will also require
using the older
I haven't tried the very latest drivers, but clearly
184.108.40.206 and 2.6.20, at least with respect to MythTV
and this specific
(I don't recall if a direct access to the video device
file worked with
more recent kernels, but I have run into situations in
works but MythTV doesn't. MythTV seems picky that
> First chance I get, I'll provide log files, but
> now I will say that the mythtv log file that I
> afterwards continually showed errors with reference
> IVTV at the time that I tried to enable the card. I
> didn't compile mythtv with IVTV enabled, nor does
> card have anything to do with IVTV.
I just checked my log file and I see a bunch of error
IVTV, too. My system does work, though.
> So that gets me
> to thinking that the configuration for MPEG2
> cards only applies to IVTV devices.
Definitely not. I've got two non-IVTV MPEG-2 cards
(well, one card and
device) on my MythTV system.
That said, my understanding is that the API used by
the IVTV drivers
universally supported, and that there's another API
that's now being
most drivers. My very limited understanding is that
MythTV still uses
IVTV-specific API. It's conceivable that the Blackbird
support for the IVTV API. This could be causing some
but it shouldn't be causing total failures, AFAIK.
I've tried to learn
about this, but I couldn't find any user-oriented
documentation on it
last looked (a few months ago).
> Well, as you may see, it's been very frustrating
> me. I expected the card to be more compatible,
> because the blackbird drivers have gotten more
> In windows, at least, some people like this card
> better than the hauppauge cards. If you could
> describe your setup, what version software you are
> using, and what firmware (check the size of it) you
> are using, that could be of help. As for me, when I
> get back, I'll post my log files.
Check the wiki; all that information is there. I think
to using a too-recent kernel (or blackbird driver from
the right kernel driver version, it works, albeit with
quirks. With the
driver version, it's completely foobared.
Unfortunately, newer is not
at least between 220.127.116.11 and 2.6.20 (I think I also
tried 2.6.21 at
point, and I definitely tried more recent
out-of-kernel drivers). The
18.104.22.168 kernel is certainly not "current" by Linux
standards, but it's
yet so old that it should cause you problems to use
it, unless you've
some bleeding-edge piece of hardware that requires
newer drivers. In
case you may need to patch the kernel with the newer
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
More information about the mythtv-users