[mythtv-users] Asus M2NPV-VM based MythTV box
mitchell.gore at gmail.com
Sun Sep 16 17:03:46 UTC 2007
n 9/16/07, Joacim J <jocke4news at gmail.com> wrote:
> I have a fresh built HTPC based upon Asus M2NPV-VM (NVIDIA GeForce 6150 +
> nForce 430). To get it complete I need to solve these issues:
> 1. The motherboard have support for S/PDIF and I have bought the bracket
> for it (optical and coaxial S/PDIF). I have not got this to work and would
> appreciate any help.
Make sure the input it unmuted. To do this play some music and in terminal
run alsamixer. unmute all outputs by pushing the m key and turning the
volume up with the arrow keys. usally the output for spdif is labeled
"IEC958" then in myth FE, in the setting under general select ALSA:spdif in
all boxes. For my two boxes this was all that was required.
2. The HTPC is connected to a 32" CRT TV (Sony KV-32FX60E). The TV is quite
> old and have only 3 scarts as input. I have tried to use s-video with
> s-video/scart adapter but that gives unstable picture (switching between
> grey and normal) abd therefore I have connected it via composite and
> composite/scart adapter. The picture does not fill the screen and aren't
> straight in the edges (not completely in the picture either, e.g. on the
> OSD ). How should I setup X to work with a CRT TV?
> 3. I miss some information for the TV above such as:
> - Horizontal/Vertical Sync ?
> - Recommended resolution ?
Not sure about any of this I am in the US.
Any hints/recommendations are very welcome!!
> PS. My wife are not that satisfied about the new "gadget" right now and I
> need to sort things out :) DS
> mythtv-users mailing list
> mythtv-users at mythtv.org
Good luck. After some tunning the WAF will go up.!
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users