[mythtv-users] Loss of digital audio from 0.20 to 0.21

[Allen Edwards]

On Wed, Aug 20, 2008 at 11:45 AM, Julianne C. <juliannerc at gmail.com> wrote:
> I have just finished upgrading my MythTV installation from 0.20 to
> 0.21.  When I put the rig back into its place, the digital output
> (coax) failed to operate.  Previously, I used the /dev/dsp device w
> SPDIF passthrough
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>

Try this:

Audio output device: ALSA:spdif
Passthrougth output device: ALSA:iec958:(AESO 0x02)
Max Audio Channels Stereo
Upmix: Passive
x Enable AC3 to SPDIF passthrough
x Enable DTS to SPDIF passthrough
 Aggressive Sound Card Buggers
 Use Internal volume controls
(last 2 not checked)


Allen