[mythtv-users] AVerMedia AVerTV DVB-T Volar USB not initialised on startup

[Stephen Brooks]

You should be able to do something with modules.conf to control the order,

e.g.

preinstall modA /sbin/modprobe modB

I think should work but strikes me as a bit agricultural i.e. there
should be a better way.

On Thu, Feb 14, 2008 at 7:13 AM, Greg Ahpee <greg at ahpee.org> wrote:
> I have a similar problem with a Tiny-USB running on Debian which works
>  most of the time but sometimes fails to initialize at startup. After
>  much searching I found mention that problems may be experienced if the
>  usb kernel module ohci_hcd loads before ehci_hcd. Checking my kernel
>  logs indicates that this is indeed the case for me. All is ok if
>  ehci_hcd loads first otherwise it fails. It has been suggested that
>  blacklisting ohci_hcd may get around the problem but may (will?) result
>  in  no high speed usb capability. I have not tried this solution nor
>  have I found any way to control the module loading order.
>
>
>
>
>  _______________________________________________
>  mythtv-users mailing list
>  mythtv-users at mythtv.org
>  http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>