[mythtv-users] missing EIT for single transponder
Markus Schulz
msc at antzsystem.de
Sat Feb 16 13:26:15 UTC 2008
Hello,
i'm using mythtv-trunk (Revision: 15948) with a dvb-c + dvb-s card.
the channels are mostly the same, cause my dvb-c provider dumps the
signal from astra-19.2E into the cable network.
But for a single dvb-s transponder i got no EIT informations. The
corresponding dvb-c transponder works fine. I can tune to each channel
of this transponder but got no eit for the dvb-s one.
Backend log produces the following messages on changing to one of the
problematic channels:
2008-02-16 14:13:30.340 DTVSM(3) Error: Wrong PMT; pmt->pn(12090)
desired(12003)
2008-02-16 14:13:30.375 EITHelper: Added 3 events
2008-02-16 14:13:30.396 DTVSM(3) Error: Wrong PMT; pmt->pn(12020)
desired(12003)
2008-02-16 14:13:30.396 DTVSM(3) Error: Wrong PMT; pmt->pn(12080)
desired(12003)
2008-02-16 14:13:30.449 DTVSM(3) Error: Wrong PMT; pmt->pn(12040)
desired(12003)
2008-02-16 14:13:30.450 DTVSM(3) Error: Wrong PMT; pmt->pn(12060)
desired(12003)
2008-02-16 14:13:30.503 DTVSM(3) Error: Wrong PMT; pmt->pn(12095)
desired(12003)
2008-02-16 14:13:30.503 DTVSM(3) Error: Wrong PMT; pmt->pn(12005)
desired(12003)
2008-02-16 14:13:30.503 DTVSM(3) Error: Wrong PMT; pmt->pn(12004)
desired(12003)
2008-02-16 14:13:30.556 DTVSM(3) Error: Wrong PMT; pmt->pn(12061)
desired(12003)
2008-02-16 14:13:30.556 DTVSM(3) Error: Wrong PMT; pmt->pn(12041)
desired(12003)
2008-02-16 14:13:30.722 Finished recording Unbekannt: channel 15003
I've rescanned the transponder, only change was that "serviceversion"
was incremented (24->27). All important data (networkid, transportid)
was equal to the corresponding dvb-c transponder where eit works fine.
Any ideas?
--
Markus Schulz
More information about the mythtv-users
mailing list