[mythtv-users] Driver quits responding?

[Michael Lovelace]

I have an HVR-1600 on a Pentium 4 2Ghz machine here running Mythbuntu
7.10.

I am having some issues with LiveTv however. I keep seeing this in the
backend log and it seems to correlate with the pauses I'm seeing while
watching LiveTv.

MPEGRec(/dev/video0) Error: select timeout - ivtv driver has stopped
responding.

I do think it is something in my Myth setup because I can play live tv
directly from /dev/video mplayer or vlc without any hangups.

Any suggestions out there?
lspci -v output:
00:0e.0 Multimedia video controller: Conexant CX23418 Single-Chip MPEG-2
Encoder with Integrated Analog Video/Broadcast Audio Decoder

Subsystem: Hauppauge computer works Inc. Unknown device 7400
        Flags: bus master, medium devsel, latency 64, IRQ 22
        Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

dmesg info
[   24.406003] cx18:  Start initialization, version 0.1.0
[   24.406082] cx18-0: Initializing card #0
[   24.406086] cx18-0: Autodetected Hauppauge card
[   24.406129] cx18-0: Unreasonably low latency timer, setting to 64
(was 32)
[   24.406280] cx18-0: cx23418 revision 01010000 (B)
[   24.557734] cx18-0: Autodetected Hauppauge HVR-1600
[   24.915430] tuner 2-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
[   24.916959] tuner 2-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
[   24.916998] cs5345 1-004c: chip found @ 0x98 (cx18 i2c driver #0-0)
[   24.919557] cx18-0: Disabled encoder IDX device
[   24.919609] cx18-0: Registered device video0 for encoder MPEG (2 MB)
[   24.919674] cx18-0: Registered device video16 for TS (2 MB)
[   24.919715] cx18-0: Registered device video32 for encoder YUV (2 MB)
[   24.919751] cx18-0: Registered device vbi0 for encoder VBI (1 MB)
[   24.919789] cx18-0: Registered device video24 for encoder PCM audio
(1 MB)
[   24.919826] cx18-0: Registered device radio0 for encoder radio
[   24.921026] cx18-0: Initialized card #0: Hauppauge HVR-1600
[   24.921048] cx18:  End initialization