[mythtv-users] s-video resolution
Wouter van Atteveldt
wouter at 2at.nl
Tue Jul 15 09:37:39 UTC 2008
> From: mythtv-users-bounces at mythtv.org [mythtv-users-bounces at mythtv.org] On Behalf Of James Stembridge [jstembridge at gmail.com]
> Sent: 15 July 2008 11:13
> > I am a bit desparate on that: I tried a lot of stuff, but even the BIOS does not give a signal on the DVI out, even though I set the startup to CRT+DVI in the BIOS. I've tried both with a DVI-
> >HDMI cable and a DVI->VGA dongle (see my previous posts to this mailing list, dated 14/6 and 16/6).
> > If anyone can help me to get the DVI out working, I would be extremely grateful!
> Sorry I can't remember if you've confirmed this before, but are you
> sure the dvi header is ok? On the same board I get dvi output from the
> bios by default. I'll check my settings later to see what I have set
> in there.
Thanks for the reply!
How do I make sure the dvi header is ok?
I was actually beginning to suspect hardware issues because of the lack of BIOS output (but I've never done anything with DVI or HDMI before, so I assumed I was probably doing something wrong...).
Unfortunately, I removed the PCI bracket from the DVI connector (which is connected to the mobo using a ribbon cable) to fit it into my case, so I've probably voided my warranty at least on that part...
More information about the mythtv-users