[mythtv-users] Provo with mythtv-0.21 and Hardy

[Matthew Asplund]

I have an old Compaq P3 system that has been running Dapper and myth happily
for two years, using a PVR-150 tuner card.  I am preparing to go HD (I
ordered an HDHomeRun, and build a new BE/FE) so I decided to upgrade to
Hardy and myth 0.21.  I saved the database, installed Hardy (on a second
disk, so that I can always go back, it help with the WAF), copied the
recordings and restored the database.  I can play all of my old recordings,
but when I try to run live TV, I get an error
"X Error: BadAlloc (insufficient resources for operation) 11
  Major opcode: 140
  Minor opcode 19
  Resource id: 0x0"
and it plays sound, but only a blue screen.

If I try to play the file with vlc, it fails with the same error.  If I make
a clip using cat /dev/video0 > test.mpg, and try to play that it also
fails.  I went to /var/log/messages, and is shows that everything started up
fine
Jul 22 22:54:46 media kernel: [   59.010473] ivtv:  Start initialization,
version 1.1.0
Jul 22 22:54:46 media kernel: [   59.010929] ivtv0: Initializing card #0
Jul 22 22:54:46 media kernel: [   59.010941] ivtv0: Autodetected Hauppauge
card (cx23416 based)
Jul 22 22:54:46 media kernel: [   59.178301] ivtv0: Autodetected Hauppauge
WinTV PVR-150
Jul 22 22:54:46 media kernel: [   59.902597] tuner 2-0043: chip found @ 0x86
(ivtv i2c driver #0)
Jul 22 22:54:46 media kernel: [   59.934489] tuner 2-0061: chip found @ 0xc2
(ivtv i2c driver #0)
Jul 22 22:54:46 media kernel: [   60.096780] cx25840 2-0044: cx25843-23
found @ 0x88 (ivtv i2c driver #0)
Jul 22 22:54:46 media kernel: [   60.149259] wm8775 2-001b: chip found @
0x36 (ivtv i2c driver #0)
Jul 22 22:54:46 media kernel: [   60.170530] ivtv0: Registered device video0
for encoder MPG (4096 kB)
Jul 22 22:54:46 media kernel: [   60.170569] ivtv0: Registered device
video32 for encoder YUV (2048 kB)
Jul 22 22:54:46 media kernel: [   60.170614] ivtv0: Registered device vbi0
for encoder VBI (1024 kB)
Jul 22 22:54:46 media kernel: [   60.170649] ivtv0: Registered device
video24 for encoder PCM (320 kB)
Jul 22 22:54:46 media kernel: [   60.170694] ivtv0: Registered device radio0
for encoder radio
Jul 22 22:54:46 media kernel: [   60.170701] ivtv0: Initialized card #0:
Hauppauge WinTV PVR-150
Jul 22 22:54:46 media kernel: [   60.170745] ivtv:  End initialization
Jul 22 22:54:51 media kernel: [   75.432175] ivtv0: Loaded
v4l-cx2341x-enc.fw firmware (376836 bytes)
Jul 22 22:54:51 media kernel: [   75.628424] ivtv0: Encoder revision:
0x02060039


Does anybody have any suggestions?

Matt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20080723/92048a3c/attachment.htm