[mythtv-users] myth 0.21 and ATI video resolution issue
last_atarian at yahoo.com
Fri Jun 13 03:19:45 UTC 2008
Thanks for your suggestion. I went ahead and tried the latest version of the open source drivers as you suggested. The good news is that the resolution switching is *much* better. The bad news is that it won't display the video when using TV out. After switching to live TV, a blue screen comes up and Malloc errors are continuously generated on the console.
The interesting thing is that it only seems to be MythTV that can't display video. I tried mplayer and xine. Both worked perfectly in windowed and full-screen modes using the s-video out.
----- Original Message ----
From: Nick Morrott <knowledgejunkie at gmail.com>
To: Discussion about mythtv <mythtv-users at mythtv.org>
Sent: Wednesday, June 11, 2008 8:07:19 PM
Subject: Re: [mythtv-users] myth 0.21 and ATI video resolution issue
On 12/06/2008, J. Addington <last_atarian at yahoo.com> wrote:
> Hello all.
> I've been using Myth for a few years and have built a couple of machines for it but I always use NVIDIA cards. I happen to have a machine that already had an ATI card in it so I decided to try it. Most everything works now except that when I change channels from a station that broadcasts in HD to one that is in SD or vice-versa, the resolution in the playback doesn't change properly and the image is all distorted. However, once that occurs, I can go to the program guide and then back to the full-screen and it then goes to a normal picture. Or I can exit to the main menu and then back to TV and it will also work fine.
> I've searched the net and found some others with the same issue, but no solutions. One I found is here:
> I know it's likely an issue with ATI's buggy proprietary drivers but I am hoping there is some sort of work-around someone is aware of for the time being?
> Myth 0.21
> ATI X300 (ATI Proprietary Drivers v8.5)
> Pinnacle HDTV PCI
> Linux kernel 184.108.40.206
Have you tried using the open-source radeon driver as a stop-gap? It
supports your X300 card:
http://wiki.cchtml.com/index.php/Open_source_drivers, but I can't say
how it will handle HDTV (although it does have Xv support, so if your
CPU is beefy enough, it could work).
MythTV Official wiki:
MythTV users list archive:
"An investment in knowledge always pays the best interest." - Benjamin Franklin
mythtv-users mailing list
mythtv-users at mythtv.org
More information about the mythtv-users