[mythtv-users] Doing an actual scan of the channels
Ma Begaj
derliebegott at gmail.com
Mon Mar 24 18:08:47 UTC 2008
2008/3/22, Ciro Iriarte <cyruspy at gmail.com>:
> 2008/3/18, Robert Koblish <rkoblish at gmail.com>:
>
> > On Tue, Mar 18, 2008 at 12:06 AM, Ciro Iriarte <cyruspy at gmail.com> wrote:
> > > 2008/3/17, Robert Koblish <rkoblish at gmail.com>:
> > >
> > > >
> > > > According to <http://en.wikipedia.org/wiki/Television_channel_frequencies>
> > > > all of Region 2 (the Americas) uses the same table of broadcast
> > > > channel assignments. Make sure also that you've selected the correct
> > > > broadcast standard; according to <http://en.wikipedia.org/wiki/NTSC>
> > > > Paraguay is now using the NTSC-M standard/
> > > >
> > > > HTH
> > > > Bob Koblish
> > > >
> > >
> > > Huh?, did we change?, where have I been?!....
> > > http://en.wikipedia.org/wiki/PAL states we're still PAL-N :p
> > >
> > > I tried every frequency table with 0.20, i'll check again with 0.21 as
> > > soon as I can...
> > >
> > > Regards,
> > >
> > >
> > > Ciro
> >
> >
> > Well, apparently the Wikipedia NTSC article is wrong. Other sources on
> > the Web say that Paraguay, Argentina, and Bolivia use PAL-N, a variant
> > of PAL that uses the Region 2 6-MHz-wide channel but with 3.58 MHz
> > color subcarrier. My bad for trusting Wikipedia.
> >
> > Regards
> > Bob
> >
>
>
> Installed Vista to discard issues with the card and can only get 3
> channels, probably an antenna issue, but one of them has pretty
> acceptable quality. I get the same results with WinTV and choosing
> PAL-N and Argentina for the frequency table. With try-all and PAL-N on
> mythtv 0.21 this is what I get for the same channel (local Channel 9)
>
> 138 ---> No audio
> http://www.turboimagehost.com/p/202530/ch9.png.html
> 139 ---> Audio, but worse video
> http://www.turboimagehost.com/p/202529/ch9-audio.png.html
>
> Same channel with WinTV:
> http://img186.imageshack.us/img186/5889/wintvch9640zs7.jpg
>
> Is there any way to take the frequency table from Vista Media Center or WinTV?
>
>
> CI.-
Install xawtv, let it search and use these freqs in MythTv. You can
just copy values in MythSetup.
More information about the mythtv-users
mailing list