[mythtv-users] LIRC problems after Ubuntu 8.04 update --SOLVED
Ian Hodgson
ian.hodgson.home at googlemail.com
Tue May 6 07:42:51 UTC 2008
I had a request to post the lines that I changed in my hardware.conf file...
1) First, I used 'cat /proc/bus/input/devices' to determine the correct
remote device number.
2) Then, in the hardware.con file I edited REMOTE_DRIVER="dev/input"
3) And REMOTE_DEVICE="/dev/input/eventx" where x is the number found in
step 1)
With the lircrc file from Gary Parker's site, all is now working.
Ian Hodgson wrote:
> Mario,
> Many thanks for your suggestion; this was exactly right. I had
> wrongly copied my old hardware.conf file in to the new installation, but
> the format has changed from v7.04 to v8.04. Having correctly set the
> driver and device fields, it is now working.
>
> Thanks again, Ian
>
> Mario Limonciello wrote:
>> Ian Hodgson wrote:
>>
>>> I have just updated by MythTV box to v0.21 and Ubuntu 8.04;
>>> everything that I have tried works just fine apart from the
>>> Hauppauge remote control. I went back to the original installation
>>> procedure and, after playing about for a while, concluded that the
>>> lircd is not running. As part of my testing, I tried...
>>>
>>> xxx at yyyy:~$ sudo lircd -n --driver=dev/input --device=/dev/input/event6
>>> lircd-0.8.3pre1[8065]: lircd(userspace) ready
>>> lircd-0.8.3pre1[8065]: accepted new client on /dev/lircd
>>> lircd-0.8.3pre1[8065]: initializing '/dev/input/event6'
>>> lircd-0.8.3pre1[8065]: removed client
>>> lircd-0.8.3pre1[8065]: closing '/dev/input/event6'
>>> lircd-0.8.3pre1[8065]: accepted new client on /dev/lircd
>>> lircd-0.8.3pre1[8065]: initializing '/dev/input/event6'
>>> lircd-0.8.3pre1[8065]: removed client
>>> lircd-0.8.3pre1[8065]: closing '/dev/input/event6'
>>> lircd-0.8.3pre1[8065]: caught signal
>>>
>>> ...which worked prefectly with 'irw' and in MythTV, but when I
>>> try to start the daemon, it will not start...
>>>
>>> xxx at yyyy:~$ sudo /etc/init.d/lirc start
>>> * Loading LIRC
>>> modules [ OK ]
>>> * Starting remote control daemon(s) :
>>> LIRC [fail]
>>>
>>> I can not find anything in the system logs to indicate the
>>> source of the problem. I did find an Ubuntu Hardy Heron bug report
>>> for beta 1 release (204960), but nothing else to indicate that this
>>> is an ongoing problem. Has anyone else come across this and found a
>>> way to fix it?
>>> Many thanks.
>>> _______________________________________________
>>> mythtv-users mailing list
>>> mythtv-users at mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>>
>> This sounds like you have /etc/lirc/hardware.conf misconfigured.
>> You should
>> check what it's contents are.
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>
>
>
More information about the mythtv-users
mailing list