[mythtv-users] PVR-150 Blaster help Centos 5.2

[Nick Morrott]

On 10/11/2008, Gregg <3gemail at gmail.com> wrote:
> I have installed lirc following this guide
>  http://www.blushingpenguin.com/mark/blog/?p=24
>
>  The remote control works great, but I can not figure out what I am
>  doing wrong on the blaster side. Below are some of my config files.
>
>  here is my /dev/lirc*
>  lrwxrwxrwx 1 root root     5 Nov  9 15:03 /dev/lirc -> lirc0
>  crw-rw---- 1 root lirc 61, 0 Nov  9 15:03 /dev/lirc0
>  srw-rw-rw- 1 root root     0 Nov  9 15:03 /dev/lircd
>
>  udev rule
>  KERNEL=="lirc[0-9]*", NAME="lirc%n", MODE="0660", GROUP="lirc"
>  KERNEL=="lirc0", SYMLINK="lirc"
>
>  modprobe.conf
>  alias char-major-61 lirc_i2c
>
>  And here is the lircd log file
>
>  Nov  9 09:02:11 eyeballs lircd: error processing command: SEND_ONCE
>  DirectTV_RC16 one
>  Nov  9 09:02:11 eyeballs lircd: transmission failed
>  Nov  9 09:02:11 eyeballs lircd: removed client
>  Nov  9 09:02:35 eyeballs lircd: accepted new client on /dev/lircd
>  Nov  9 09:02:35 eyeballs lircd: write failed
>  Nov  9 09:02:35 eyeballs lircd: Protocol error

Is the "one" IR command from the "DirectTV_RC16" remote definition
supported by the blaster? The PVR-150 blaster can only transmit
particular IR signals.

-- 
Nick Morrott

MythTV Official wiki:
http://mythtv.org/wiki/
MythTV users list archive:
http://www.gossamer-threads.com/lists/mythtv/users

"An investment in knowledge always pays the best interest." - Benjamin Franklin