[mythtv-users] Serial-USB control of Directv H20

[William]

Dave Badia wrote:
> I have a Directv H20 receiver, and have been trying to get channel 
> changing working reliably through the USB connection.  It seems to 
> work just fine for a day or 2, but then the receiver will stop 
> responding via the usb port:
> Initializing Serial Port: /dev/ttyS0
> SEND: 0xFA [ú] 0xA5 [¥] 0x0 [] 0x1 [] 0xE8 [è]
> RECV: Timeout Error
>
> All other functions on the H20 see to work fine, it's just the USB 
> port that stops responding
> The only solution I have found to reset the H20 via the red button.  
> Immediately after that, the script will work again for a few days at 
> the most.
>
> I'm looking for feedback from others as to if anyone else is having 
> similar issues.  The references I have found indicate that others have 
> this working without issue:  
> http://www.gossamer-threads.com/lists/engine?do=post_view_flat;post=319270;page=1;mh=-1;list=mythtv;sb=post_latest_reply;so=ASC
>
> Thanks
> Dave
> ------------------------------------------------------------------------
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>   
Sounds like a hardware issue. Try turning off support for USB 2.0 and 
force it to send at a slower rate. Thats usually a bios function on most 
motherboards. There may also be a "legacy" mode you can try.