[mythtv-users] Problem with tunercard

Per Jørgensen myth at pbj-design.dk
Wed Oct 22 08:41:37 UTC 2008


Hey group.

I have a strange problem with my card (Hauppauge HVR-4000)!
I have the DVB-S Input connected to a DISCeQ with 2 LNB's.
And that's the only card I got connected. When showing Input sources, I 
got the 2 different input (port1 and port2) on the DVB:0!
Underneath there's a new DVB:0 input Source ??? It seems to me like it 
counting this package along with the other 2 cards, Caurse running a 
MythTV-status , as I got  during Login - I'm getting this :
####################################################
MythTV status for localhost
===========================
Status...........: Wed Oct 22 2008, 10:20 AM
Total Disk Space.: Total space is 191,421 MB, with 16,190 MB used (8.5%)
Next Recording In: Never

Encoders:
core (1) - Idle
core (2) - Idle
core (3) - Idle

####################################################

As you can see I got 3 tuner sources?

And when running a select * from capturecard - it gives me this:
| cardid | videodevice | audiodevice | vbidevice | cardtype | 
defaultinput | audioratelimit | hostname | dvb_swfilter | dvb_sat_type | 
dvb_wait_for_seqstart | skipbtaudio | dvb_on_demand | dvb_diseqc_type | 
firewire_port | firewire_node | firewire_speed | firewire_model | 
firewire_connection | dbox2_port | dbox2_httpport | dbox2_host | 
signal_timeout | channel_timeout | dvb_tuning_delay | contrast | 
brightness | colour | hue | diseqcid | dvb_eitscan |
+--------+-------------+-------------+-----------+----------+--------------+----------------+----------+--------------+--------------+-----------------------+-------------+---------------+-----------------+---------------+---------------+----------------+----------------+---------------------+------------+----------------+------------+----------------+-----------------+------------------+----------+------------+--------+-----+----------+-------------+
|      1 | 0           |             |           | DVB      | DVBInput 
#1  |           NULL | core     |            0 |            0 
|                     1 |           0 |             0 |            NULL 
|             0 |             2 |              0 | NULL           
|                   0 |      31338 |             80 | NULL       
|          60000 |           62500 |                0 |        0 
|          0 |      0 |   0 |        1 |           1 |
|      2 | 0           | NULL        | NULL      | DVB      | DVBInput 
#1  |           NULL | core     |            0 |            0 
|                     1 |           0 |             0 |               0 
|             0 |             2 |              0 | NULL           
|                   0 |      31338 |             80 | NULL       
|          60000 |           62500 |                0 |        0 
|          0 |      0 |   0 |        1 |           1 |
|      3 | 0           | NULL        | NULL      | DVB      | DVBInput 
#1  |           NULL | core     |            0 |            0 
|                     1 |           0 |             0 |               0 
|             0 |             2 |              0 | NULL           
|                   0 |      31338 |             80 | NULL       
|          60000 |           62500 |                0 |        0 
|          0 |      0 |   0 |        1 |           1 |
+--------+-------------+-------------+-----------+----------+--------------+----------------+----------+--------------+--------------+-----------------------+-------------+---------------+-----------------+---------------+---------------+----------------+----------------+---------------------+------------+----------------+------------+----------------+-----------------+------------------+----------+------------+--------+-----+----------+-------------+

How i the setup can I make this - I've triede several times to delete 
all tunercards! Afterwards only connect the One card
DVB:0 --> Switch ->2LNB's

And if I got these settings - How should I set this up in recording groups.
And allso
how come I got NULL in audiodevice - vbidevice - or should I in all make 
some changes in my setup for making this rigth!
Normally I had a PVR-500 also but htey keept switching places - but can 
I make t5his rigth so first of all I only got 2 Input sources ? and then 
adding for each extra Card I'm putting into the backend.

So how should I otherwise set up a DVB-S inout with a switch and 2 
LNB's  - but why is there suddenly 3 recorders instead of 2 !

Thanks

Per Jørgensen



More information about the mythtv-users mailing list