[mythtv-users] IVTV Problem with Mandriva 2008.1 and 2.6.24 kernel

[scott at tbwifi.ca]

I am running a 64 bit Mandriva 2008.1 with the 2.6.24.7-tmb-desktop-3mdv
kernel and cannot get ivtv to display anything when running mplayer
/dev/video0 or /dev/video1. I need this kernel for RAID 5 support. I have
placed the output of dmesg below. Note that I am using the proprietary ATI
driver for Xv. I just get a blank screen in mplayer on a test; not snow as
if it isn't tuned properly. I've tried compiling the latest versions of
ivtv and the ivtv-util and have placed the latest drivers in
/lib/firmware. I have two PVR-350s.  My Myth version that I am trying to
get working is SVN 18299 from 0.22.20080903-1.

Any theories?

thx!
Scott

[root at mythbox mythtv]# fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON X800 GTO
OpenGL version string: 2.1.7412 Release

I have configured it using aticongfir --ovt=Xv


ivtv: Start initialization, version 1.2.0
ivtv0: Initializing card #0
ivtv0: Autodetected Hauppauge card (cx23415 based)
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: Autodetected Hauppauge WinTV PVR-350
saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPG (1024 kB)
ivtv0: Registered device vbi8 for decoder VBI (64 kB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1024 kB)
ivtv0: Initialized card #0: Hauppauge WinTV PVR-350
ivtv1: Initializing card #1
ivtv1: Autodetected Hauppauge card (cx23415 based)
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
ivtv1: Autodetected Hauppauge WinTV PVR-350
saa7115 3-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #1)
saa7127 3-0044: saa7129 found @ 0x88 (ivtv i2c driver #1)
msp3400 3-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #1)
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
ivtv1: Registered device video1 for encoder MPG (4096 kB)
ivtv1: Registered device video33 for encoder YUV (2048 kB)
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
ivtv1: Registered device video25 for encoder PCM (320 kB)
ivtv1: Registered device radio1 for encoder radio
ivtv1: Registered device video17 for decoder MPG (1024 kB)
ivtv1: Registered device vbi9 for decoder VBI (64 kB)
ivtv1: Registered device vbi17 for decoder VOUT
ivtv1: Registered device video49 for decoder YUV (1024 kB)
ivtv1: Initialized card #1: Hauppauge WinTV PVR-350
ivtv: End initialization
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02060039
ivtv1: Decoder revision: 0x02020023
ivtv1: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.
ivtv0: All encoder MPG stream buffers are full. Dropping data.
ivtv0: Cause: the application is not reading fast enough.