[mythtv-users] Zotac ION question

[David Asher]

> I have the C-U, I have the wires going to the PWR_SW and PW_LED  
> connections
> on the board as per page 15 of the manual. It sounds like you have  
> the LED
> connection set to the HDD_LED connection.

Well, I fixed it.  It turns out the polarity of the PW_LED wires are  
important.  I had the red wire on PW_LED-, and that caused the odd  
behavior.  After I turned it around (label facing the front of the  
box), the LEDs behave as you would expect.

Thanks for the help.