[mythtv-users] mythtv-0.22, no EIT

[Alabama Cheesu]

----------------------------------------
> Date: Fri, 7 Aug 2009 16:35:40 +0100
> From: anothersname at googlemail.com
> To: mythtv-users at mythtv.org
> Subject: Re: [mythtv-users] mythtv-0.22, no EIT
>
> 2009/8/6 Alabama Cheesu :
>>
>>
>> This is for DVB-C. I see messages for both passive and active EIT scan in my logs,
>> but no error messages or anything else that would indicate something is wrong.
>>
>> If the scanner is being rewritten, I guess I'll just wait a while. Thanks.
>>
>>> From: gareth.glaccum at btopenworld.com
>>> To: mythtv-users at mythtv.org
>>> Date: Thu, 6 Aug 2009 21:37:55 +0100
>>> Subject: Re: [mythtv-users] mythtv-0.22, no EIT
>>>
>>> Is this DVB-S? I have the same symptoms if so. Scan is always successful, I
>>> can watch TV Ok, but cannot get and EPG for DVB-S (DVB-T is OK, and they are
>>> separate video sources).
>>> I asked for anyone else in similar positions 2 weeks ago, didn't get a
>>> response, so I think that there may not be too many people using trunk and
>>> DVB-S with only EIT. I put it down to the scanner being currently
>>> re-written.
>>> My logs are pretty much identical for the EIT scan as yours.
>>> Gareth
>
> Hi
>
> Can I suggest the following....
>
> stop mythbackend
>
> run mythtv-setup
>
> Remove all the channels you have from the system
>
> exit mythtv-setup
>
> start mythbackend
>
> run mythfilldatabase
>
> stop mythbackend
>
> stop and restart the sql server service
>
> rerun mythtv-setup
>
> remove all the receiver cards in the system
>
> exit mythtv-setup
>
> start mythbackend
>
> run mythfilldatabase
>
> stop mythbackend
>
> stop and restart the sql backend
>
> start mythtv-setup
>
> add your receiver cards and scan for the channels
>
> exit mythtv-setup
>
> start mythbackend
>
> run mythfilldatabase
>
> stop mythbackend
>
> stop and restart sql
>
> start mythbackend
>
>
>
> I know this whole process sounds very laborious but I've found in the
> past that sometimes settings hang around in cache and do not clear
> properly until you stop and restart the sql service.
>
> Try it and good luck.


I followed all your steps, but there was no change. 

Thanks anyway.

_________________________________________________________________
Share your memories online with anyone you want.
http://www.microsoft.com/middleeast/windows/windowslive/products/photos-share.aspx?tab=1