[mythtv-users] Favour required: imon infra red and lirc

[Phil Wild]

>
> Just checked my Logitech :
> I'm using
> Media Center PC -> Antec Fusion Remote Black
>

cool - I will reprogram again with the above

> Using all the IR code from database except for Menu, exit and guide
> where it's my own (can't remember why)
>
>> irw with your config in place does not pick up any codes when I press
>> buttons. It does show up stuff though when I use my original remote
>
> Do you have the two lirc daemon running?
>
> avenardj at pcliving:/etc/lirc$ ps ax | grep lir
>  4058 ?        S<s    0:00 /usr/sbin/lircd --driver=default
> --device=/dev/lirc0 /etc/lirc/lirc0.conf --output=/dev/lircd --listen
>  4060 ?        S<s    0:00 /usr/sbin/lircd --driver=default
> --device=/dev/lirc1 /etc/lirc/lirc1.conf --output=/dev/lircd
> --connect=localhost 8765 --pidfile=/var/run/lircd1.pid
>
yes I do

root      4159     1  0 16:02 ?        00:00:00 /usr/sbin/lircd
--driver=default --device=/dev/lirc1 /etc/lirc/lirc1.conf
--output=/dev/lircd --connect=localhost 8765
--pidfile=/var/run/lircd1.pid
root      4163     1  0 16:02 ?        00:00:00 /usr/sbin/lircd
--driver=default --device=/dev/lirc0 /etc/lirc/lirc0.conf
--output=/dev/lircd --listen

>> 000000002ab195b7 00 Go mx200
>> 0000000002000028 00 Enter mx200
>> 0000000002000028 00 Enter mx200
>
> At least it's working for some buttons ...

Actually it isn't... This is output from my original antec remote...

>>
>> Are you in Australia?
>
> yepper

I am in Perth