[mythtv-users] alsa spdif works with myth but not xine, aplay or mplayer
Jean-Yves Avenard
jyavenard at gmail.com
Sat Feb 21 14:53:27 UTC 2009
Hi
2009/2/22 Eric Sharkey <eric at lisaneric.org>:
>
> This is incorrect. The poster is asking about non-DTS and non-ac3 audio.
Ooops, I read that he wanted dts
>
> In other words, how do you get normal PCM audio from normal linux
> sound producing apps to go out over SPDIF and not analog?
>
> I'm not sure off the top of my head.
That's what .asoundrc is for
The following .asoundrc should do (provided he's correct with the
output of aplay -l ; that is the spdif port is card 0 device 1
----
# Override the default output used by ALSA.
# If you do not override the default, your default
# device is identical to the (unmixed) analog device
# shown below. If you prefer mixed and/or digital
# output, uncomment the appropriate four lines below
# (only one slave.pcm line).
### Currently set w/digital-hw as the default output,
### comment out this entire section to use unmixed
### analog as your default
### -jarod
pcm.!default {
type plug
## Uncomment the following to use mixed analog by default
# slave.pcm "dmix-analog"
## Uncomment the following to use unmixed digital by default
slave.pcm "digital-hw"
## Uncomment the following to use mixed digital by default
# slave.pcm "dmix-digital"
}
# Alias for analog output on the Audigy (hw:0,0)
# - This is identical to the device named "default"--which
# always exists and refers to hw:0,0 (unless overridden)
# - Therefore, we can specify "hw:0,0", "default", or "analog"
# to access analog output on the Audigy
pcm.analog {
type plug
slave.pcm "analog-hw"
}
# Control device (mixer, etc.) for the Audigy card
ctl.analog {
type hw
card 0
}
# Alias for (rate-converted) mixed analog output on the
# Audigy (hw:0,0)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the dmix plugin
# (in this case 48000Hz)
pcm.mixed-analog {
type plug
slave.pcm "dmix-analog"
}
# Control device (mixer, etc.) for the Audigy card
ctl.mixed-analog {
type hw
card 0
}
# Alias for (rate-converted) digital (S/PDIF) output on the
# Audigy (hw:0,0)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.digital {
type plug
slave.pcm "digital-hw"
}
# Control device (mixer, etc.) for the Audigy card
ctl.digital {
type hw
card 0
}
# Alias for mixed (rate-converted) digital (S/PDIF) output on the
# Audigy (hw:0,0)
# - This will accept audio input--regardless of rate--and
# convert to the rate required for the S/PDIF hardware
# (in this case 48000Hz)
pcm.mixed-digital {
type plug
slave.pcm "dmix-digital"
}
# Control device (mixer, etc.) for the Audigy card
ctl.mixed-digital {
type hw
card 0
}
# The following devices are not useful by themselves. They
# require specific rates, channels, and formats. Therefore,
# you probably do not want to use them directly. Instead use
# of of the devices defined above.
# Alias for analog output on the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.analog-hw {
type hw
card 0
# The default value for device is 0, so no need to specify
}
# Control device (mixer, etc.) for the Audigy card
ctl.analog-hw {
type hw
card 0
}
# Alias for digital (S/PDIF) output on the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.digital-hw {
type hw
card 0
device 1
}
# Control device (mixer, etc.) for the Audigy card
ctl.digital-hw {
type hw
card 0
}
# Direct software mixing plugin for analog output on
# the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.dmix-analog {
type dmix
ipc_key 1234
slave {
pcm "analog-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the Audigy card
ctl.dmix-analog {
type hw
card 0
}
# Direct software mixing plugin for digital (S/PDIF) output
# on the Audigy (hw:0,0)
# Do not use this directly--it requires specific rate,
# channels, and format
pcm.dmix-digital {
type dmix
ipc_key 1235
slave {
pcm "digital-hw"
period_time 0
period_size 1024
buffer_size 4096
rate 48000
}
}
# Control device (mixer, etc.) for the Audigy card
ctl.dmix-digital {
type hw
card 0
}
----
More information about the mythtv-users
mailing list