[mythtv-users] Installed Two AVerMedia AVerTVHD MCE A180

[Adam Siegel]

I've installed two AVerMedia AVerTVHD MCE A180 PCI cards.  They are both
recognized.  When I do a modprobe

modprobe saa7134 card=75

The first card shows

[24779.475969] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 16, latency:
32, mmio: 0xec000000
[24779.475982] saa7130[0]: subsystem: 1461:1044, board: AVerMedia AVerTVHD
MCE A180 [card=75,insmod option]
[24779.476030] saa7130[0]: board init: gpio is 10400

However the second card shows

[24779.667103] saa7130[1]: found at 0000:00:0a.0, rev: 1, irq: 18, latency:
32, mmio: 0xec001000
[24779.667111] saa7130[1]: subsystem: 1461:1044, board: UNKNOWN/GENERIC
[card=0,autodetected]
[24779.667125] saa7130[1]: board init: gpio is 10400

I am not sure why the second card is not getting the "card=75" option on the
modprobe.

The first card gets a /dev/video0 and a /dev/dvb/adapter0

The second card only gets a /dev/video1

The first card shows the firmware loading

[24779.860274] nxt200x: NXT2004 Detected
[24779.860382] DVB: registering new adapter (saa7130[0])
[24779.860388] DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM
frontend)...

The second card is not registered as a DVB adapter.  Probably because it is
not getting the card=75 option.

The first card is working great.  Picture and sound are perfect.

Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20090127/69ee9321/attachment.htm>