[mythtv-users] Installed Two AVerMedia AVerTVHD MCE A180

[Kevin Kuphal]

On Tue, Jan 27, 2009 at 8:49 AM, Adam Siegel <agsiegel at gmail.com> wrote:

> I've installed two AVerMedia AVerTVHD MCE A180 PCI cards.  They are both
> recognized.  When I do a modprobe
>
> modprobe saa7134 card=75
>
> The first card shows
>
> [24779.475969] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 16, latency:
> 32, mmio: 0xec000000
> [24779.475982] saa7130[0]: subsystem: 1461:1044, board: AVerMedia AVerTVHD
> MCE A180 [card=75,insmod option]
> [24779.476030] saa7130[0]: board init: gpio is 10400
>
> However the second card shows
>
> [24779.667103] saa7130[1]: found at 0000:00:0a.0, rev: 1, irq: 18, latency:
> 32, mmio: 0xec001000
> [24779.667111] saa7130[1]: subsystem: 1461:1044, board: UNKNOWN/GENERIC
> [card=0,autodetected]
> [24779.667125] saa7130[1]: board init: gpio is 10400
>
> I am not sure why the second card is not getting the "card=75" option on
> the modprobe.
>
> The first card gets a /dev/video0 and a /dev/dvb/adapter0
>
> The second card only gets a /dev/video1
>
> The first card shows the firmware loading
>
> [24779.860274] nxt200x: NXT2004 Detected
> [24779.860382] DVB: registering new adapter (saa7130[0])
> [24779.860388] DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM
> frontend)...
>
> The second card is not registered as a DVB adapter.  Probably because it is
> not getting the card=75 option.
>
> The first card is working great.  Picture and sound are perfect.
>
> Any ideas?


Sorry I don't have a great suggestion.  I'm using two A180's in my system
but I don't use any "card=X" option when loading.  I thought I remembered
something from other drivers of a syntax for the second card like
"card=75,75"?   You might try googling around for other dual card scenarios
(ivtv, etc) to see if there is a standard syntax for setting the second card
option

Kevin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20090127/7b346c3e/attachment.htm>