[mythtv-users] Installed Two AVerMedia AVerTVHD MCE A180

[Adam Siegel]

You are the man, card=75,75 worked like a charm.

Regards,
Adam

On Tue, Jan 27, 2009 at 9:59 AM, Kevin Kuphal <kkuphal at gmail.com> wrote:

>
>
> On Tue, Jan 27, 2009 at 8:49 AM, Adam Siegel <agsiegel at gmail.com> wrote:
>
>> I've installed two AVerMedia AVerTVHD MCE A180 PCI cards.  They are both
>> recognized.  When I do a modprobe
>>
>> modprobe saa7134 card=75
>>
>> The first card shows
>>
>> [24779.475969] saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 16,
>> latency: 32, mmio: 0xec000000
>> [24779.475982] saa7130[0]: subsystem: 1461:1044, board: AVerMedia AVerTVHD
>> MCE A180 [card=75,insmod option]
>> [24779.476030] saa7130[0]: board init: gpio is 10400
>>
>> However the second card shows
>>
>> [24779.667103] saa7130[1]: found at 0000:00:0a.0, rev: 1, irq: 18,
>> latency: 32, mmio: 0xec001000
>> [24779.667111] saa7130[1]: subsystem: 1461:1044, board: UNKNOWN/GENERIC
>> [card=0,autodetected]
>> [24779.667125] saa7130[1]: board init: gpio is 10400
>>
>> I am not sure why the second card is not getting the "card=75" option on
>> the modprobe.
>>
>> The first card gets a /dev/video0 and a /dev/dvb/adapter0
>>
>> The second card only gets a /dev/video1
>>
>> The first card shows the firmware loading
>>
>> [24779.860274] nxt200x: NXT2004 Detected
>> [24779.860382] DVB: registering new adapter (saa7130[0])
>> [24779.860388] DVB: registering frontend 0 (Nextwave NXT200X VSB/QAM
>> frontend)...
>>
>> The second card is not registered as a DVB adapter.  Probably because it
>> is not getting the card=75 option.
>>
>> The first card is working great.  Picture and sound are perfect.
>>
>> Any ideas?
>
>
> Sorry I don't have a great suggestion.  I'm using two A180's in my system
> but I don't use any "card=X" option when loading.  I thought I remembered
> something from other drivers of a syntax for the second card like
> "card=75,75"?   You might try googling around for other dual card scenarios
> (ivtv, etc) to see if there is a standard syntax for setting the second card
> option
>
> Kevin
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20090127/6d79d953/attachment.htm>