[mythtv-users] Update on air guide.
Gareth Glaccum
gareth.glaccum at btopenworld.com
Tue Jul 21 13:36:44 UTC 2009
Don't suppose anyone has any ideas on this before I log it as a 'bug'?
It is in trunk.
MBE has 3 DVB-T cards, these perform scans correctly. These are set to be a
StandardChans channel group
SBE has 1 DVB-S card. This is set as a Satellite channel group
This has been set with a tick against 'allow card to be used for active EIT'
The card has been used to scan for channels with both enable encrypted, and
encrypted channels disabled (just in case).
All channels that I am looking at appear to have useonairguide set, mythweb
shows no data for any channel (BBC should have data at least).
I have had the 'Input' set to be generic, and created a new group called
satellite, neither setting has made a difference.
System has been left overnight scanning. I have turned on -v
important,general,eit,schedule,extra, and the following is reported, even
though I have just deleted all channels and performed a new channel scan.
Any ideas on other areas I should check. I am performing these settings from
the SBE (this is where I have done it previously). I assume that setting
from the MBE can only change the DVB-T settings. I have deleted and
recreated the card several times (hence it is now 41!!!)
I can use liveTV to browse to the satellite channels and view them. The only
thing I don't expect here, is when I leave say BBC2 (6302) to go to BBC 1
London (6301) the SBE reports "Finished recording Unknown: channel 10302".
The unknown is expected as the EIT doesn't get the program name, but the
channel appears to have no relevance to anything set.
????
Gareth
2009-07-21 13:56:45.986 EITCache: Deleting old cache entries from the
database
2009-07-21 13:56:46.098 Program #5634 not found in PAT!
Program Association Table
PSIP tableID(0x0) length(65) extension(0x7f3)
version(24) current(1) section(0) last_section(0)
tsid: 2035
programCount: 14
program number 0 has PID 0x 10 data 0x 0 0x 0 0xe0 0x10
program number 4301 has PID 0x 100 data 0x10 0xcd 0xe1 0x 0
program number 4326 has PID 0x 101 data 0x10 0xe6 0xe1 0x 1
program number 4328 has PID 0x 102 data 0x10 0xe8 0xe1 0x 2
program number 4812 has PID 0x 108 data 0x12 0xcc 0xe1 0x 8
program number 4813 has PID 0x 109 data 0x12 0xcd 0xe1 0x 9
program number 5004 has PID 0x 10b data 0x13 0x8c 0xe1 0x b
program number 5007 has PID 0x 10a data 0x13 0x8f 0xe1 0x a
program number 5287 has PID 0x 105 data 0x14 0xa7 0xe1 0x 5
program number 5291 has PID 0x 107 data 0x14 0xab 0xe1 0x 7
program number 5552 has PID 0x 103 data 0x15 0xb0 0xe1 0x 3
program number 5553 has PID 0x 104 data 0x15 0xb1 0xe1 0x 4
program number 5556 has PID 0x 105 data 0x15 0xb4 0xe1 0x 5
program number 8001 has PID 0x 106 data 0x1f 0x41 0xe1 0x 6
2009-07-21 13:56:46.552 ProcessPAT: Program not found in PAT.
Rescan your transports.
2009-07-21 13:56:46.557 Desired program #5634 not found in PAT.
Can Not create single program PAT.
2009-07-21 14:02:13.388 EITScanner (41): Now looking for EIT data on
multiplex of channel 5479
2009-07-21 14:02:13.396 EITCache: Pruning all entries that ended before UTC
2009-07-20T14:07:39
2009-07-21 14:02:13.397 EITCache: Deleting old cache entries from the
database
2009-07-21 14:02:13.958 EITScanner (41): Started passive scan.
2009-07-21 14:02:17.805 PID 0x913 status: Encrypted
2009-07-21 14:02:23.578 PID 0x912 status: Encrypted
2009-07-21 14:07:40.962 EITScanner (41): Now looking for EIT data on
multiplex of channel 5606
2009-07-21 14:07:40.966 EITCache: Pruning all entries that ended before UTC
2009-07-20T14:13:06
2009-07-21 14:07:40.967 EITCache: Deleting old cache entries from the
database
2009-07-21 14:07:41.340 EITScanner (41): Started passive scan.
2009-07-21 14:07:45.197 PID 0x287 status: Encrypted
2009-07-21 14:07:48.564 PID 0x207 status: Encrypted
----- Original Message -----
From: "Gareth Glaccum" <gareth.glaccum at btopenworld.com>
To: "Discussion about mythtv" <mythtv-users at mythtv.org>
Sent: Thursday, July 16, 2009 9:55 PM
Subject: Re: [mythtv-users] Update on air guide.
>Is the DVB-S card set to use active EIT collection in mythtv-setup? If
>it isn't, data collection only occurs when you're recording or
Unfortunately so
>Also, in addition to the video source being configured to use EIT,
>each of the channels on that source also need to have their
>'useonairguide' flag set for listings to be collected.
it is checked (for at least the BBC channels, which previously worked)
More information about the mythtv-users
mailing list