[mythtv-users] Can I suppress a particular backend error message?
John Pilkington
J.Pilk at tesco.net
Wed Jun 3 22:37:11 UTC 2009
I've just brought back into use in 0.21 fixes an old usb dvb-t device
that I had stopped using when it apparently became incapable of tuning
the more complex multiplexes. I find that if I collect the multiplex
info tables by scanning with a more capable card the old device still
gives good recordings, but it produces an error message about once a
second while doing so. I'm using it as virtual tuners 5 and 6, so it's
not often active.
2009-06-03 22:48:01.364 PIDInfo(0): Failed to open demux device
/dev/dvb/adapter0/demux0 for filter on pid 0x104
2009-06-03 22:48:02.367 PIDInfo(0): Failed to open demux device
/dev/dvb/adapter0/demux0 for filter on pid 0x105
2009-06-03 22:48:03.369 PIDInfo(0): Failed to open demux device
/dev/dvb/adapter0/demux0 for filter on pid 0x108
2009-06-03 22:48:04.374 PIDInfo(0): Failed to open demux device
/dev/dvb/adapter0/demux0 for filter on pid 0x109
2009-06-03 22:48:05.377 PIDInfo(0): Failed to open demux device
/dev/dvb/adapter0/demux0 for filter on pid 0x10a
2009-06-03 22:48:06.380 PIDInfo(0): Failed to open demux device
/dev/dvb/adapter0/demux0 for filter on pid 0x10b .... and so on.
Janne created patches two years ago that, IIRC, fixed this; patches were
12572 and 12800 for ticket #1970. The new messages are more informative
but rather too insistent. Using 'mythbackend -v norecord' risks losing
really useful information. Is there a more specific option?
John P
More information about the mythtv-users
mailing list