[mythtv-users] Update to lirc 0.8.5 breaks things
hobbes1069 at gmail.com
Sun Jun 21 04:17:50 UTC 2009
On Sat, Jun 20, 2009 at 10:20 PM, Jarod Wilson <jarod at wilsonet.com> wrote:
> On 06/20/2009 11:06 PM, Richard Shaw wrote:
> and now my
>> remote doesn't work. This configuration has worked flawlessly since
>> Fedora 8. I'm now getting some output from dmesg I don't
>> remember seeing
>> [root at calvin ~]# dmesg | grep lirc
>> lirc_dev: IR Remote Control driver registered, major 61
>> lirc_serial: auto-detected active low receiver
>> Do you know if it was auto-detected as active low previously?
>> Definitely makes a difference... You could try forcing it to active
>> high as a test. (add modparam 'sense=0')
>> Not sure but tried sense=0 (i.e. "modprobe lirc_serial sense=0" if
>> that's the correct way to do it) and didn't see anything different in
>> dmesg. It still said "low".
> Hrm. That certainly shouldn't be the case... You did unload the lirc_serial
> module before that, right? What you should be seeing (in dmesg) is:
> lirc_serial: Manually using active high receiver
Yup, did a rmmod lirc_serial (but I didn't unload lirc_dev) the first time,
but as you saw in the lines below I did a modprobe -r which did unload both.
> Load lirc_serial with the module param 'debug=1', see what else it
>> says. You can try fiddling with other module options as well.
>> I didn't see anything helpful but here's the output:
> The output from modprobe isn't what's interesting, its the stuff that gets
> spewed into dmesg afterwards when trying to use it. :)
It doesn't look like the module parameters are either getting passed to
lirc_serial or that they're not being accepted. I'm not seeing any
additional output from dmesg. Is that something I could put in my
> Since "irw" didn't work I tried stopping the service and running
>> irrecord to make sure it wasn't my remote config but it had an issue as
>> [root at calvin modprobe.d]# irrecord test
>> irrecord - application for recording IR-codes for usage with lirc
>> Copyright (C) 1998,1999 Christoph Bartelmus(lirc at bartelmus.de
>> <mailto:lirc at bartelmus.de>)
>> irrecord: could not get hardware features
>> irrecord: this device driver does not support the LIRC ioctl interface
>> irrecord: make sure you use a current version of the driver
>> irrecord: could not init hardware (lircd running ? --> close it, check
> Hrm... That's not looking particularly good... I may have vague
> recollections of Janne saying that was known to be busted though, even when
> the receiver is working properly. I really do need to dive into lirc_serial
> code again, but its... grotty...
> For the record, what kernel version is this with? Need to compare the
> lirc_serial code in it w/current cvs and git trees...
I also have a Fedora 11 install running 220.127.116.11-167.fc11.x86_64 which I
could move the receiver to for comparison testing if it would be helpful.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users