[mythtv-users] DVI to HDMI what about th eaudio???
vbtalent at gmail.com
Sun Mar 1 03:00:38 UTC 2009
I just ran test to see where my problem lies... and it turns out to be with
I pulled a dvd player that had DVI out RCA audio and I hooked it through the
HDMI1 port on the tv and I got both sound and video.
I found a post that describes my issue to a "T" (
http://forums.nvidia.com/lofiversion/index.php?t88272.html) and modifying
the xorg worked but now the picture is jacked up...
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Option "ExactModeTimingsDVI" "True"
Option "UseEdid" "FALSE"*
Below from the NVidia appendix doesn't seem to have the option for only
turning of the sound, anyone else have any ideas???
*Option "UseEdidFreqs" "boolean"*
*This option controls whether the NVIDIA X driver will use the HorizSync and
VertRefresh ranges given in a display device's EDID, if any. When
UseEdidFreqs is set to True, EDID-provided range information will override
the HorizSync and VertRefresh ranges specified in the Monitor section. If a
display device does not provide an EDID, or the EDID does not specify an
hsync or vrefresh range, then the X server will default to the HorizSync and
VertRefresh ranges specified in the Monitor section of your X config file.
These frequency ranges are used when validating modes for your display
*Default: True (EDID frequencies will be used)*
*Option "UseEDID" "boolean"*
*By default, the NVIDIA X driver makes use of a display device's EDID, when
available, during construction of its mode pool. The EDID is used as a
source for possible modes, for valid frequency ranges, and for collecting
data on the physical dimensions of the display device for computing the DPI
(see Appendix Y, Dots Per
However, if you wish to disable the driver's use of the EDID, you can set
this option to False:*
* Option "UseEDID" "FALSE"
*Note that, rather than globally disable all uses of the EDID, you can
individually disable each particular use of the EDID; e.g.,*
* Option "UseEDIDFreqs" "FALSE"
Option "UseEDIDDpi" "FALSE"
Option "ModeValidation" "NoEdidModes"
*Default: True (use EDID).*
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users