[mythtv-users] No TV after upgrade to .22 using PVR-350 TVOUT-help!

[sdkovacs]

On Thu, Nov 12, 2009 at 6:24 PM, Craig Isdahl <craig at dashsystems.com> wrote:
>
>
>> -----Original Message-----
>> From: mythtv-users-bounces at mythtv.org [mailto:mythtv-users-
> [root at mythtv ~]# dmesg | grep ivtv
> ivtv: Start initialization, version 1.4.1
> ivtv0: Initializing card 0
> ivtv0: Autodetected Hauppauge card (cx23415 based)
> cx25840 1-0044: cx25  0-21 found @ 0x88 (ivtv i2c driver #0)
> ivtv0: Autodetected Hauppauge WinTV PVR-350
> saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
> msp3400 1-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0)
> tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
> tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
> ivtv0: Registered device video0 for encoder MPG (4096 kB)
> ivtv0: Registered device video32 for encoder YUV (2048 kB)
> ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
> ivtv0: Registered device video24 for encoder PCM (320 kB)
> ivtv0: Registered device radio0 for encoder radio
> ivtv0: Registered device video16 for decoder MPG (1024 kB)
> ivtv0: Registered device vbi8 for decoder VBI (64 kB)
> ivtv0: Registered device vbi16 for decoder VOUT
> ivtv0: Registered device video48 for decoder YUV (1024 kB)
> ivtv0: Initialized card: Hauppauge WinTV PVR-350
> ivtv: End initialization
> ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
> ivtv0: Loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02060039
> ivtv0: Decoder revision: 0x02020023
> ivtv0: Loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
> ivtvfb0: Framebuffer at 0xf9510000, mapped to 0xf9890000, size 1665k
> ivtvfb0: Framebuffer registered on ivtv0
>

Can you VNC into screen 0? There was a strange problem a couple of us
were seeing, but it occurred just as I was switching to an NVIDIA
card, so I didn't follow up. See:

http://www.gossamer-threads.com/lists/ivtv/users/40432