[mythtv-users] After .22 update, my Hauppauge PVR-500 now shows as remote and disconnected, will not record, help?
kkuphal at gmail.com
Sat Nov 14 21:20:43 UTC 2009
On Sat, Nov 14, 2009 at 2:09 PM, Despayre <mythtv at rccfo.ca> wrote:
> Michael T. Dean wrote:
>> On 11/14/2009 02:19 PM, Despayre wrote:
>>> Changed both addresses in mythtv-setup on the master backend (where the
>>> encoders are) to 127.0.01, under General, restarted the backend, no
>>> difference. (and since I run more than 1 front end, I need the IP address at
>>> the top of the general screen to be the LAN IP anyway). Any other thoughts?
>> You can not /ever/ use 127.0.0.1 in any mythtv config with more than one
>> host. Use a real/routable IP address.
> Unfortunately, the LAN IP address that I replaced with 127.0.0.1 was
> 192.168.1.248, in both places, which is the correct IP. Any other thoughts?
I'd suggest, with you 192.168 addresses in place in mythtv-setup to delete
all tuners and add them again. My gut feeling says this would fix your
issue probably created by using 127.0.0.1 addresses or a combination of
settings changes during your testing that has messed things up.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users