[mythtv-users] compile problem: scte65scan on mythbuntu 9.10 64 bit with HDHR support

[Dave Richardson]

>> On Tue, Nov 17, 2009 at 7:34 AM, Dave Richardson <mythtv at derdev.com>
>> wrote:
>>> Eric, can you stick with me a bit more?
>>
>> Of course.
>>
>>> root at mythbackmaster:/usr/src/scte65scan-0.2.1/libhdhomerun# nm -D
> libhdhomerun.so | grep msleep
>>> 00000000000051e0 T msleep
>>
>> Ok, that shouldn't have happened.  It looks like Silicon Dust has
> changed things around in the latest release and that's what's breaking
> things.  These are no longer static inlines.
>>
>> Try the following patch the scte65scan's Makefile.hdhr:
>>
>> Add this line near the top:
>>
>> LIBOBJS += $(HDHR_DIR)/hdhomerun_os_posix.o
>>
>> And change the LDFLAGS line a few lines down so that it looks like this:
>>
>> LDFLAGS += -lpthread -lrt
>>
>> and then try recompiling scte65scan.
>>
>> Eric
>>
>
> THAT compiled scte65scan - thank you for that!
>
> Now, in trying to run it, I'm using this command with failed result (only
> one HDHR on network)  I'm hopeful that this problem is of my ignorance...
>
> root at mythbackmaster:/usr/src/scte65scan-0.2.1/libhdhomerun#
> ./hdhomerun_config FFFFFFFF get /sys/version
> 20091110beta1
>
> cd ..
>
> root at mythbackmaster:/usr/src/scte65scan-0.2.1# ./scte65scan -H=FFFFFFFF,0
> -p -V 0x0bec us-Cable-Standard-center-frequencies-QAM256
> WARNING: invalid HDHR device id: =FFFFFFFF
>
>
> -> Do I need to back down the firmware to match the earlier libhdhomerun
> version???
>

I'll answer my own question here... "-H FFFFFFFF" works, I added "=" that
broke the command, it's busy scanning for locks now!