[mythtv-users] Lost audio after upgrade

[Jean-Yves Avenard]

Hi

2009/10/17 Allen Edwards <allen.p.edwards at gmail.com>:
> Audio output device: ALSA:default
> Passthrough output device: Default
> Max Audio Channels: Stereo (MUST BE SET TO STEREO as of 6/2/2009 for
> passthrough to work)

Not if using trunk >= 22432


> Upmix: Passive
> Enable AC3 to SPDIF passthrough checked
> Enable DTS to SPDIF passthrough checked
> Aggressive sound card buffering off

You'll need to adapt your howto for the new audio code , it's much
easier now ...

>
> You might also try this for asound.conf
>
>  pcm.!default {
>     type plug
>     slave.pcm "spdif"
>  }
>
> But you probably already tried this as it is what is in the howto
> http://www.mythtv.org/wiki?title=AllensDigitalAudioHowto
>
> Allen
>
> Use internal volume controls off
this can n ow be used with digital audio provided you set the mixer to
"software"