[mythtv-users] Samsung CRT HD 32" TV WS32Z30HE
Steve V
olivuts at yahoo.com
Sun Sep 13 08:49:45 UTC 2009
----- Original Message ----
> From: Tortise <tortise at paradise.net.nz>
> To: Discussion about mythtv <mythtv-users at mythtv.org>
> Sent: Saturday, 12 September, 2009 5:34:09 PM
> Subject: [mythtv-users] Samsung CRT HD 32" TV WS32Z30HE
>
> Howdy
>
> I am connecting this Samsung CRT TV up using an NVIDIA (9400GT) card over
> component.
>
> It runs OK @ a default 1024x768 however I cannot get it to run at 720p (1280x720
> or 1080i | 1920x1080). (Blank blue screen)
>
> The below settings work fine on a similar Sony CRT 32" TV. (HX32 and also
> DA32!)
>
> In xorg.conf I have:
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "TV-0"
> HorizSync 24.0 - 82.0
> VertRefresh 50.0 - 75.0
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Device0"
> Monitor "Monitor0"
> DefaultDepth 24
> Option "ConnectedMonitor" "TV"
> Option "TVOutFormat" "COMPONENT"
> Option "NoLogo" "True"
> Option "AddARGBGLXVisuals" "True"
> Option "TwinView" "0"
> Option "metamodes" "TV: 1280x720 +0+0" #!!!Comment out for 1080i
> else ok as default
> #720p options:
> # Option "TVStandard" "HD720p" #DOES NOT WORK ON THE SAMSUNG
> #1080i options:
> # Option "TVStandard" "HD1080i" #DOES NOT WORK ON THE SAMSUNG
> # Option "metamodes" "TV: 1280x720 +0+0"
> # Option "UseEvents" "0" #Not sure where this goes however default
> seems to be off in any event so not an issue?
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
> Section "Extensions"
> Option "Composite" "Disable"
> EndSection
>
>
>
> I am not sure if HorizSync = 24.0 - 82.0 and VertRefresh = 50.0 - 75.0 are
> correct for this TV?
>
> It seems I cannot not download its EDID settings file.
>
> What do I need to do to get it to run @ 720p and 1080i, which it is capable of
> doing....
I'm no expert but I would try the simplest possible xorg.conf first.
More information about the mythtv-users
mailing list