[mythtv-users] Hauppauge PVR 350 and LIRC setting up
Marc Chamberlin
marc at marcchamberlin.com
Thu Apr 1 22:34:22 UTC 2010
On 4/1/2010 2:57 PM, Jarod Wilson wrote:
> On Thu, Apr 1, 2010 at 5:41 PM, Marc Chamberlin<marc at marcchamberlin.com> wrote:
>
>> On 4/1/2010 2:05 PM, Scott wrote:
>>
> ...
>
>>>> Thanks again Jarod for your thoughts/help... I took the plunge and
>>>> removed the ir-kbd-i2c kernel module and installed the lirc-i2c and lirc-dev
>>>> modules. Double checked the /etc/sysconfig/lirc /etc/lircd.conf and my
>>>> .lircrc files and to the best of my understanding they seem correct. If you
>>>> like I could attach them and send them in to be looked over... I then
>>>> restarted the lirc daemon and no joy! Now nothing from my remote is being
>>>> recognized by any of the aforementioned utilities..
>>>>
>>>> Thoughts? Marc..
>>>>
>>> i would post the dmesg stuff and your lircd.conf
>>> also if irw doesnt do anything try mode2, if that shows something then its
>>> the lircd.conf
>>>
>>>
>> Thanks Scott for your suggestions... I probably should clear out my
>> /var/log/messages file first before posting dmesg stuff, kinda lengthy when
>> I grep for lirc lines... But first I am trying to figure out/understand how
>> to make the kernel module changes I made persistent when I reboot.. This is
>> new territory for me and I don't fully grok it yet...
>>
>> I have attached my lircd.conf... As for using mode2, the man pages tell me
>> that it only works with home brewed ir receivers, not with TV cards that
>> decode the IR signal.. I am using the IR port on the Hauppauge PVR-350
>> receiver so I don't think mode2 will work for me...
>>
> lircd.conf isn't actually interesting, its the /etc/sysconfig/lirc
> file and dmesg that will shed more light on what's going on. And I'd
> test for remote functionality just using irw to start out, since it
> doesn't rely on a properly set up lircrc.
>
>
Ok, attached is my lirc file and I grepped the dmesg output for any
lines that contains "lirc" and truncated the file to show changes just
before and after I reconfigured the kernel modules.. irw is not showing
any responses to my remote. Hope this is helpful...
Marc..
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100401/69a44c50/attachment-0001.htm>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lirc
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100401/69a44c50/attachment-0002.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lircMessages.txt
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100401/69a44c50/attachment-0003.txt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 6464 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100401/69a44c50/attachment-0001.bin>
More information about the mythtv-users
mailing list