[mythtv-users] mythtv-setup can't find any channels.

[Rodd Clarkson]

I have a Leadtek USB Dongle Gold that I can't get mythtv-setup to find
any channels on.

lsusb shows:
Bus 002 Device 008: ID 0413:6029 Leadtek Research, Inc. 

If I run 'scandvb /usr/share/dvb-apps/dvb-t/au-Melbourne' if has no
problems finding the channels that should appear.

For example:

$ scandvb /usr/share/dvb-apps/dvb-t/au-Melbourne 
scanning /usr/share/dvb-apps/dvb-t/au-Melbourne
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 226500000 1 3 9 3 1 1 0
initial transponder 177500000 1 3 9 3 1 1 0
initial transponder 191625000 1 3 9 3 1 1 0
initial transponder 219500000 1 3 9 3 1 1 0
initial transponder 536625000 1 2 9 3 1 2 0
>>> tune to:
226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
0x0000 0x0230: pmt_pid 0x0102 ABC -- ABC HDTV (running)
0x0000 0x0231: pmt_pid 0x0100 ABC -- ABC1 (running)
0x0000 0x0232: pmt_pid 0x0101 ABC -- ABC2 (running)
0x0000 0x0233: pmt_pid 0x0103 ABC -- ABC1 (running)
0x0000 0x0234: pmt_pid 0x0106 ABC -- ABC3 (running)
0x0000 0x0236: pmt_pid 0x0104 ABC -- ABC Dig Music (running)
0x0000 0x0237: pmt_pid 0x0105 ABC -- ABC Jazz (running)
Network Name 'ABC Melbourne'
<snip the rest of output>


However, when I try scanning for channels in mythtv-setup it get
nothing.

I've tried setting bigger values for Signal Timeout and Tuning Timeout
in Capture Card Setup, but this doesn't seem to improve anything, it
just takes longer to run the scan.

Any suggestions?


Rodd