[mythtv-users] Working HVR-1800
Barry Fawthrop
barry at isscp.com
Mon Apr 19 18:41:26 UTC 2010
Thank
I have the same card
dmesg
[ 9.977033] CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge
WinTV-HVR1800 [card=2,autodetected]
[ 10.151780] lp: driver loaded but no devices found
[ 10.165950] tveeprom 0-0050: Hauppauge model 78521, rev C1E9, serial#
2786312
[ 10.165954] tveeprom 0-0050: MAC address is 00-0D-FE-2A-84-08
[ 10.165956] tveeprom 0-0050: tuner model is Philips 18271_8295 (idx
149, type 54)
[ 10.165959] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital
(eeprom 0x88)
[ 10.165961] tveeprom 0-0050: audio processor is CX23887 (idx 42)
[ 10.165963] tveeprom 0-0050: decoder processor is CX23887 (idx 37)
[ 10.165965] tveeprom 0-0050: has radio
[ 10.165967] cx23885[0]: hauppauge eeprom: model=78521
[ 10.192433] cx25840 2-0044: cx25 0-21 found @ 0x88 (cx23885[0])
[ 10.196540] cx25840 2-0044: firmware: requesting
v4l-cx23885-avcore-01.fw
No matter what I try I either get a screwed up picture (looks green and
purple)
or I get tvtime with good picture and NO audio.
My provider says it is Digital Cable
But I can only get a signal on the middle of the THREE input connectors
which is all analog
I can't get scan or w_scan to find any channels thus can not create a
channels.conf file
Where did you get the v4l-dvb source and what was your steps
Anything you can remember that may help would be great
Thanks
Barry
On Mon, 2010-04-19 at 13:28 -0500, Kenneth Emerson wrote:
> Does anyone have a working setup with an Hauppauge HVR-1800
> No matter what I try the best I can get is video with tvtime
> and no
> audio.
>
> Barry:
>
>
> I have an HVR-1800 currently working on my system. I am using Jaunty
> (ubuntu 9.04) and I installed the v4l-dvb source. It has been a while
> since I set it up and I am only using the digital tuner. It has been
> very reliable for me for almost two years. How can I help you?
>
>
> ken at mythtv:~$ dmesg | grep 1800
> [ 14.674302] CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge
> WinTV-HVR1800 [card=2,autodetected]
>
>
> -- Ken E.
More information about the mythtv-users
mailing list