[mythtv-users] Udev Help

[John P Poet]

On Tue, Feb 2, 2010 at 4:00 PM, greg <greg12866 at nycap.rr.com> wrote:
>  I've been fighting an issue where my HD_PVR and Pvr-150 has been swapping
> nodes.. I have tried every solution I can find, and none of them seem to
> work..
> I have developed 2 rules and they seemed to work,but after a reboot they
> still occasionally still swap..
> My question is would someone take a look at these rules and see if there is
> something obvious I am missing..
>
> KERNEL=="video*", ATTR{name}=="ivtv0 encoder MPG", ATTRS{vendor}=="0x4444",
> SYMLINK+="video_PVR150"
>
> KERNEL=="video*", ATTR{name}=="Hauppauge HD PVR", ATTRS{vendor}=="0x8086",
> SYMLINK+="video_hdpvr"
>

Even with those rules, are you still trying to use /dev/video0 and
/dev/video1 in Myth?  If so, that is your problem.  Using the rules
you have defined there, use /dev/video_PVR150 and /dev/video_hdpvr in
Myth.

John
-- 
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?