[mythtv-users] EDID problem
Chris Porter
hoodlum7 at gmail.com
Sun Jan 24 05:19:46 UTC 2010
On Sat, Jan 23, 2010 at 1:31 PM, Claude Gélinas <claude at phyto.qc.ca> wrote:
> Le samedi 23 janvier 2010 15:47:17, Kenni Lund a écrit :
> > 2010/1/23 Claude Gélinas <claude at phyto.qc.ca>:
> > > Le samedi 23 janvier 2010 10:13:10, MarcT a écrit :
> > >> Is it controled by the video card or the mobo ?
> > >>
> > >>How long of a time period are we talking about?
> > >>Shut off TV 1 sec later turn back on or shut off, wait 30 mins turn
> back
> > >> on?
> > >>
> > >>Have you tried adding the below to your startup script?
> > >>/usr/bin/xset -dpms
> > >>/usr/bin/xset s off
> > >
> > > Yes I have these two line in a startup script in
> .kde/Autostart/mythtv.sh
> >
> > Instead of deactivating DPMS, try removing these xset commands from
> > your startup script and add these lines to your xorg.conf:
> >
> > Activate DPMS in your "Monitor" section:
> > Option "DPMS"
> >
> > Add the following "ServerFlags"-section if you don't already have one
> > (in that case just copy-paste the four lines):
> > Section "ServerFlags"
> > Option "BlankTime" "0"
> > Option "StandbyTime" "0"
> > Option "SuspendTime" "0"
> > Option "OffTime" "0"
> > EndSection
> >
> > I don't know if it will help in your case, but it's worth a try :)
> >
> > Best Regards
> > Kenni Lund
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> I've put all these in my xorg.conf but still no luck. no TV after switching
> off
> and on again
> --
> Claude Gélinas agr.
> Phyto Ressources inc.
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
FYI the line
Option "TVStandard" "NTSC-M"
is not needed unless you are using TV-OUT. You are using DFP-0 which is a
DVI or HDMI connection.
I use the following settings in my xorg.conf for my HDMI connection to my
TV. Using an onboard GeForce 8300.
Option "CustomEDID" "DFP-0:/etc/X11/tv-edid.bin"
Option "UseDisplayDevice" "DFP-0"
Option "ConnectedMonitor" "DFP-0"
Option "ExactModeTimingsDVI" "True"
Option "ModeValidation" "NoDFBNativeResolutionCheck"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mythtv.org/pipermail/mythtv-users/attachments/20100123/7b66877c/attachment.htm>
More information about the mythtv-users
mailing list