[mythtv-users] Hauppauge WinTV Nova-T PCI Setup for 0.22

[Richard Scott]

Are you running RHEL/Centos 5 ? There's a bug in the latest version of 
module-init-tools which breaks support for most/all of the video devices.
If you downgrade module-init-tools to the version from 5.3, the cards 
should appear again.

Richard

On 25/01/2010 21:32, Ben Edwards wrote:
> I have the above card, 'lspci | grep Conexant' gives me.
>
> 07:07.0 Multimedia video controller: Conexant Systems, Inc.
> CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
> 07:07.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3
> PCI Video and Audio Decoder [MPEG Port] (rev 05)
> 07:07.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3
> PCI Video and Audio Decoder [IR Port] (rev 05)
> 07:09.0 Multimedia video controller: Conexant Systems, Inc.
> CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
> 07:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3
> PCI Video and Audio Decoder [MPEG Port] (rev 05)
> 07:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3
> PCI Video and Audio Decoder [IR Port] (rev 05)
>
> I have recently upgraded from 0.21 to 0.22.  I had re re-setup my
> video sources but not I get the following when I restart my back end.
>
> snip...
> 2010-01-25 21:26:14.787 New DB connection, total: 2
> 2010-01-25 21:26:14.789 Connected to database 'mythconverg' at host: localhost
> 2010-01-25 21:26:14.791 New DB connection, total: 3
> 2010-01-25 21:26:14.792 Connected to database 'mythconverg' at host: localhost
> 2010-01-25 21:26:14.807 TVRec(7) Error: Start channel invalid, setting
> to '3' on input DVB instead.
> 2010-01-25 21:26:14.813 DVBChan(7:/dev/video1) Error: Failed to get
> frontend information.
> 			eno: Invalid argument (22)
> 2010-01-25 21:26:14.817 TVRec(8) Error: Start channel invalid, setting
> to '3' on input DVB instead.
> 2010-01-25 21:26:14.823 DVBChan(8:/dev/video0) Error: Failed to get
> frontend information.
> 			eno: Invalid argument (22)
> 2010-01-25 21:26:14.828 TVRec(9) Error: Start channel invalid, setting
> to '3' on input DVB instead.
> 2010-01-25 21:26:14.833 DVBChan(9:/dev/video1) Error: Failed to get
> frontend information.
> 			eno: Invalid argument (22)
> 2010-01-25 21:26:14.838 TVRec(10) Error: Start channel invalid,
> setting to '3' on input DVB instead.
> 2010-01-25 21:26:14.843 DVBChan(10:/dev/video0) Error: Failed to get
> frontend information.
> 			eno: Invalid argument (22)
> 2010-01-25 21:26:14.845 MythBackend, Error: No valid capture cards are
> defined in the database.
> 			Perhaps you should re-read the installation instructions?
> 2010-01-25 21:26:14.884 Enabling Upnpmedia rebuild thread.
> 2010-01-25 21:26:16.191 Main::Registering HttpStatus Extension
> 2010-01-25 21:26:16.192 Enabled verbose msgs:  important general
> 2010-01-25 21:26:16.196 AutoExpire: CalcParams(): Max required Free
> Space: 0.0 GB w/freq: 15 min
> 2010-01-25 21:26:25.611 UPnpMedia: BuildMediaMap VIDEO scan starting
> in :/myth/video:
> 2010-01-25 21:26:29.036 UPnpMedia: BuildMediaMap Done. Found 4582 objects
> 2010-01-25 21:27:34.853 AutoExpire: CalcParams(): Max required Free
> Space: 0.0 GB w/freq: 15 min
>
> Any ideas?
> Ben
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>