[mythtv-users] USB to Serial Adapter cable for IR Blaster?
Gary Buhrmaster
gary_buhrmaster at usa.net
Wed Mar 17 06:29:46 UTC 2010
Gary Buhrmaster wrote:
> Note that I have *NOT* yet built this....
I breadboarded the design this evening, and it seems
to work. Standard disclaimers apply:
0) Testing involved a breadboard design.
(I have not made a final solder/heat shrink
prototype that I can be happy with, nor put
it into an extended test cycle).
1) Testing involved a 60 second test only.
(irsend works and issues the keypress specified.)
2) I have not performed any voltage/current
(limit) testing to insure that the device
is operating withing the silicon manufacturer
specifications.
3) I take *no* responsibility (nor can I take
credit) for anyone who chooses to duplicate
the design and for whom it works, or
does not work, nor if the design breaks
one or more devices it is plugged into.
(You break it, you own it.)
4) Neither manufacturer (the blaster or the
DTA) has approved the design. (Any questions,
refer to disclaimer item 3.)
5) I *may* choose to answer questions regarding
the design, and then again, I may not. My
choice (not yours). If I do not answer, it
is probably not personal. (I have a real
job, and other responsibilities, and sometimes
they interfere with my play.)
YMWV.
More information about the mythtv-users
mailing list