[mythtv-users] How to patch LIRC for HD-PVR150
Jeff Cranmer
jeff at lotussevencars.com
Sat Nov 6 01:17:55 UTC 2010
> Two questions.
> (1) I think that mceusb is the receiver, from previous irw tests. Is
> this also the sender, or is that vista_mce? I'm fairly sure that the
> mceusb_hauppauge one is the sender that is built into the HDPVR, which
> I'm not using.
> (2) How do I set up the sender commands so that they are correct for
> the dish network STB? If I haven't set this up, I'd just be sending
> garbage to the STB, correct?
>
> Thanks
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I got a little bit further, I think.
I have found a configuration for a Dish 211 receiver and have added it
to /etc/lirc/lircd.conf
The configuration file is attached.
The lirc daemon is running, but when I try irsend LIST "" "", I get no
response, and irsend SEND_ONCE dish211 1 gives the error
irsend: command failed: SEND_ONCE dish211 1
irsend: unknown remote: "dish211"
Can you point me in the right direction as to why I don't see any
transmitters from irsend?
irw can see the mceusb remote button presses, and I tried restarting
lircd without any improvements.
Thanks
Jeff
-------------- next part --------------
#
# brand: HP
# model no. of remote control: TSGH-IR01
# devices being controlled by this remote: HP Slimline S3100y
#
# RC-6 config file
#
# source: http://home.hccnet.nl/m.majoor/projects_remote_control.htm
# http://home.hccnet.nl/m.majoor/pronto.pdf
#
# used by: Philips
#
#########
#
# Philips Media Center Edition remote control
# For use with the USB MCE ir receiver
#
# Dan Conti dconti|acm.wwu.edu
#
# Updated with codes for MCE 2005 Remote additional buttons
# *, #, Teletext, Red, Green, Yellow & Blue Buttons
# Note: TV power button transmits no code until programmed.
# Updated 12th September 2005
# Graham Auld - mce|graham.auld.me.uk
#
# Radio, Print, RecTV are only available on the HP Media Center remote control
#
#
# Updated with codes for MCE 2007 Remote additional buttons
# Visualization, Aspect, SlideShow, Eject
# Note:
# Renamed some buttons: DVD->DVDMenu, More->MoreInfo, Star->Asterisk, Hash->Pound
# Note:
# Blue, Yellow, Green, Red, and Teletext buttons do not exist on the HP remote
begin remote
name mceusb
bits 16
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2667 889
one 444 444
zero 444 444
pre_data_bits 21
pre_data 0x37FF0
gap 105000
toggle_bit 22
rc6_mask 0x100000000
begin codes
#seen on HP Pavilion dv3t remote --Tim Mann, 3 Nov 2009
Media 0x00007b7f
PlayPause 0x00007b91
#unused by HP remote
Blue 0x00007ba1
Yellow 0x00007ba2
Green 0x00007ba3
Red 0x00007ba4
Teletext 0x00007ba5
#ba6 - bae unused
BA6 0x00007ba6
BA7 0x00007ba7
BA8 0x00007ba8
BA9 0x00007ba9
BAA 0x00007baa
BAB 0x00007bab
BAC 0x00007bac
BAD 0x00007bad
BAE 0x00007bae
Radio 0x00007baf
Print 0x00007bb1
#bb2 - bb4 unused
BB2 0x00007bb2
BB3 0x00007bb3
BB4 0x00007bb4
Videos 0x00007bb5
Pictures 0x00007bb6
RecTV 0x00007bb7
Music 0x00007bb8
TV 0x00007bb9
#bba - bbf unused
BBA 0x00007bba
BBB 0x00007bbb
BBC 0x00007bbc
BBD 0x00007bbd
BBE 0x00007bbe
BBF 0x00007bbf
#bc1 - bca unused
BC1 0x00007bc1
BC2 0x00007bc2
BC3 0x00007bc3
BC4 0x00007bc4
BC5 0x00007bc5
BC6 0x00007bc6
BC7 0x00007bc7
BC8 0x00007bc8
BC9 0x00007bc9
BCA 0x00007bca
Eject 0x00007bcb
SlideShow 0x00007bcc
Visualization 0x00007bcd
#bce - bcf unused
BCE 0x00007bce
BCF 0x00007bcf
#bd1 - bd7 unused
BD1 0x00007bd1
BD2 0x00007bd2
BD3 0x00007bd3
BD4 0x00007bd4
BD5 0x00007bd5
BD6 0x00007bd6
BD7 0x00007bd7
Aspect 0x00007bd8
Guide 0x00007bd9
LiveTV 0x00007bda
DVD 0x00007bdb
#NoGap
Back 0x00007bdc
OK 0x00007bdd
Right 0x00007bde
Left 0x00007bdf
Down 0x00007be0
Up 0x00007be1
#NoGap
Star 0x00007be2
Hash 0x00007be3
#NoGap
Replay 0x00007be4
Skip 0x00007be5
Stop 0x00007be6
Pause 0x00007be7
Record 0x00007be8
Play 0x00007be9
Rewind 0x00007bea
Forward 0x00007beb
#NoGap
ChanDown 0x00007bec
ChanUp 0x00007bed
VolDown 0x00007bee
VolUp 0x00007bef
#NoGap
More 0x00007bf0
Mute 0x00007bf1
Home 0x00007bf2
Power 0x00007bf3
#NoGap
Enter 0x00007bf4
Clear 0x00007bf5
#NoGap
Nine 0x00007bf6
Eight 0x00007bf7
Seven 0x00007bf8
Six 0x00007bf9
Five 0x00007bfa
Four 0x00007bfb
Three 0x00007bfc
Two 0x00007bfd
One 0x00007bfe
Zero 0x00007bff
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.4a(default) on Mon Feb 23 23:55:04 2009
#
# contributed by
#
# brand: Hauppauge
# model no. of remote control:
# devices being controlled by this remote: PVR-150 Remote (MCE kit)
# SMK dongle 0609:031d
#
begin remote
name mceusb_hauppauge
bits 13
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2674 870
one 455 427
zero 455 427
pre_data_bits 24
pre_data 0x1BFF82
gap 106288
min_repeat 1
toggle_bit_mask 0x8000
rc6_mask 0x100000000
begin codes
TV 0x1BB9
Music 0x1BB8
Pictures 0x1BB6
Videos 0x1BB5
Power 0x1BF3
Stop 0x1BE6
Record 0x1BE8
Pause 0x1BE7
Play 0x1BE9
Rewind 0x1BEA
Foward 0x1BEB
Replay 0x1BE4
Skip 0x1BE5
Back 0x1BDC
More 0x1BF0
Up 0x1BE1
Left 0x1BDF
Right 0x1BDE
OK 0x1BDD
Down 0x1BE0
VolUp 0x1BEF
VolDown 0x1BEE
Home 0x1BF2
ChanDown 0x1BED
ChanUp 0x1BEC
Mute 0x1BF1
RecTV 0x1BB7
Guide 0x1BD9
LiveTV 0x1BDA
DVD 0x1BDB
One 0x1BFE
Two 0x1BFD
Three 0x1BFC
Four 0x1BFB
Five 0x1BFA
Six 0x1BF9
Seven 0x1BF8
Eight 0x1BF7
Nine 0x1BF6
Star 0x1BE2
Zero 0x1BFF
Hash 0x1BE3
Clear 0x1BF5
Enter 0x1BF4
end codes
end remote
#
# this config file was automatically generated
# using lirc-0.8.4a(default) on Tue Mar 10 19:27:09 2009
#
# contributed by
#
# brand: SIIG Vista MCE remote
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name vista_mce
bits 16
flags RC6
eps 30
aeps 100
header 2654 889
one 427 427
zero 427 427
pre_data_bits 21
pre_data 0x37FF0
gap 69850
toggle_bit_mask 0x8000
rc6_mask 0x100000000
begin codes
Power 0xEBF3
Pictures 0x6BB6
Radio 0xEBAF
Videos 0x6BB5
Music 0xEBB8
Rec 0x6BE8
Pause 0xEBE7
Stop 0x6BE6
Skipback 0xEBE4
Play 0x6BE9
Skipfwd 0xEBE5
Rwd 0x6BEA
Fwd 0xEBEB
Start 0x6BF2
Back 0xEBDC
More 0x6BF0
Volup 0xEBEF
Voldown 0x6BEE
Chup 0xEBED
Chdown 0x6BEC
Up 0xEBE1
Down 0x6BE0
Left 0xEBDF
Right 0x6BDE
Mute 0xEBF1
Rectv 0x6BB7
Guide 0xEBD9
Livetv 0x6BDA
Dvdmenu 0xEBDB
1 0x6BFE
2 0xEBFD
3 0x6BFC
4 0xEBFB
5 0x6BFA
6 0xEBF9
7 0x6BF8
8 0xEBF7
9 0x6BF6
* 0xEBE2
0 0x6BFF
# 0xEBE3
Clear 0x6BF5
Enter 0xEBF4
end codes
end remote
### Remote definition for remotes using remote code 1 (0x000)
begin remote
name dish211
bits 6
flags SPACE_ENC|NO_HEAD_REP
eps 30
header 525 6045
one 440 1645
zero 440 2780
gap 6115
advc xz eps 100
frequency 56000
# duty_cycle 32
ptrail 450
min_repeat 1
post_data_bits 10
post_data 0x000
begin codes
info 0
power_on 1
power 2
1 4
2 5
3 6
4 8
5 9
6 10
7 12
8 13
9 14
0 17
menu 11
select 16
cancel 18
guide 20
view 22
tv_vcr 23
right 24
up 26
recall 27
left 28
down 30
record 31
pause 32
stop 33
sys_info 36
asterisk 37
pound 38
power_off 39
sat 41
dish_home 52
sys_info2 54
dish_home2 56
end codes
end remote
More information about the mythtv-users
mailing list