[mythtv-users] Keymap on devinput LIRC
Josu Lazkano
josu.lazkano at gmail.com
Mon Sep 6 17:26:26 UTC 2010
Hello again, I configured the lircd.conf and I can get keys with "irw":
$ irw
0000000000010002 00 1 Pinnacle
0000000000010003 00 2 Pinnacle
00000000000100d0 00 Ford Pinnacle
00000000000100cf 00 Play Pinnacle
0000000000010080 00 Stop Pinnacle
0000000000010193 00 ChannelDown Pinnacle
0000000000010192 00 ChannelUp Pinnacle
0000000000010072 00 VolDown Pinnacle
0000000000010073 00 VolUp Pinnacle
000000000001008b 00 Menu Pinnacle
I configure .lircrc on my home this way:
$ cat .lircrc
begin
prog = mythtv
button = ChannelUp
repeat = 3
config = Up
end
begin
prog = mythtv
button = ChannelDown
repeat = 3
config = Down
end
begin
prog = mythtv
button = LEFT
repeat = 3
config = Left
end
# Play
begin
prog = mythtv
button = Play
config = Return
end
# Stop
begin
prog = mythtv
button = Stop
config = I
end
# Power Off/Exit
begin
prog = mythtv
button = Shutdown
config = Esc
end
# Pause
begin
prog = mythtv
button = Menu
repeat = 3
config = P
end
# Mute
begin
prog = mythtv
button = Mute
repeat = 3
config = |
end
# Record
begin
prog = mythtv
button = Record
repeat = 3
config = R
end
But, I can manage MythTV with the keys, shall I need to config some other files?
Thanks or all and best regards.
2010/9/5 Josu Lazkano <josu.lazkano at gmail.com>:
> Hello everybody! I just installed a backend/fronted and a fronted
> system with a DVB-T. I want to control with a remote.
>
> I have a devinput device and well configured LIRC, this is my config:
>
> # cat hardware.conf
> # /etc/lirc/hardware.conf
> #
> # Arguments which will be used when launching lircd
> LIRCD_ARGS=""
>
> #Don't start lircmd even if there seems to be a good config file
> #START_LIRCMD=false
>
> #Don't start irexec, even if a good config file seems to exist.
> #START_IREXEC=false
>
> #Try to load appropriate kernel modules
> LOAD_MODULES=true
>
> # Run "lircd --driver=help" for a list of supported drivers.
> DRIVER="devinput"
> # If DEVICE is set to /dev/lirc and udev is in use /dev/lirc0 will be
> # automatically used instead
> DEVICE="/dev/input/event9"
> MODULES=""
>
> # Default configuration files for your hardware if any
> LIRCD_CONF="/etc/lirc/lircd.conf"
> LIRCMD_CONF="/etc/lirc/lircmd.conf"
>
> # cat lircd.conf
> begin remote
>
> name Pinnacle PCTV 72e
> bits 16
> eps 30
> aeps 100
>
> one 0 0
> zero 0 0
> pre_data_bits 16
> pre_data 0x1
> gap 251982
> toggle_bit_mask 0x16000000
>
> begin codes
> Mute 0x0071
> Menu 0x008B
> Shutdown 0x0074
> VolUp 0x0073
> VolDown 0x0072
> ChannelUp 0x0192
> ChannelDown 0x0193
> 1 0x0002
> 2 0x0003
> 3 0x0004
> 4 0x0005
> 5 0x0006
> 6 0x0007
> 7 0x0008
> 8 0x0009
> 9 0x000A
> 0 0x000B
> FullScreen 0x0177
> Text 0x0184
> Back 0x00A8
> Play 0x00CF
> Ford 0x00D0
> Record 0x00A7
> Stop 0x0080
> Help 0x00DF
> end codes
>
> end remote
>
> How can I config to use on MythTV fronted? Where I must config it?
>
> Thanks for all and best regards.
>
> --
> Josu Lazkano
>
--
Josu Lazkano
More information about the mythtv-users
mailing list