[mythtv-users] Hauppauge 1250 in lspci only
Johnny Walker
johnnyjboss at gmail.com
Wed Sep 22 15:15:44 UTC 2010
On Tue, Sep 21, 2010 at 9:09 PM, Dan Rose <dan at linuxtrader.com> wrote:
> My new Hauppauge HDPVR-1250 tuner/capture card always shows up in lspci as
> does the driver (cx23885) in the kernel, but there is no /dev/dvb or other
> device entry that mythtv can use.
>
> Running...
>
> mythbuntu 10.04.1 with current updates on kernel 2.6.32-24-generic.
> Autobuilds updated to .23.1
> v4l-dvb fresh compile, install and reboot. (including the firedtv=n
> setting required for Ubuntu compiles)
>
> as a fresh install on a Zotac ION Nvidia Series w/ Dual Core Atom N330,
> 2GB memory.
>
>
> Many attempts with stock v4l-dvb driver cx23885 and then updated/compiled
> v4l-dvb included multiple iterations of reboots, manual removal and
> insertion of cx23885 into the kernel, but no joy in /dev, so no device
> found in sudo mythtv-setup
>
>
> listing kernel modules: lsmod | grep cx23885 #shows up
> removing this module: rmmod cx23885 # clears out
> re-adding this module:
> insmod ./v4l/cx23885.ko card=3 # re-add successful
> OR..
> insmod
> /lib/modules/2.6.32-24-generic/kernel/drivers/media/video/cx23885/cx23885.ko
> card=3
>
>
> mythbackend -version like this
> http://mythtv.pastebin.com/8nP23FeW
>
> v4l-dvb compile and install like this:
> http://mythtv.pastebin.com/301uqxhZ
>
> The specific lspci -v output is here:
> http://mythtv.pastebin.com/daY1NWgA
>
> Full lspci -v output is here:
> http://mythtv.pastebin.com/9ZctUaQq
>
> Full listing of /dev is here:
> http://mythtv.pastebin.com/gUEsNwMD
>
> lsmod short list is here:
> http://mythtv.pastebin.com/hBE3kdWz
>
> lsmod long list is here:
> http://mythtv.pastebin.com/WGTujpug
>
> snippet of kern.log and messages: http://mythtv.pastebin.com/gQTs25S4
> and then
> http://mythtv.pastebin.com/yJxAbhkq and
> http://mythtv.pastebin.com/mbz4CYiA
>
>
> Searched prior threads but seems like the H 1250 just works for most people.
>
> Thanks for reading.
> --
> Dan Rose
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
Thanks to the guys on the #mythtv-users channel that helped out on this.
The solution is here:
http://mythtv.beirdo.ca/ircLog/channel/1/2010-09-22:10:18:38
Basically card=20 was needed as a module parameter.
-JohnnyJ
More information about the mythtv-users
mailing list