[mythtv-users] HD-PVR: Suggestions on what to try next?

[Andrew Stadt]

On 10/04/2011 2:20 PM, Andrew Stadt wrote:
> On 10/04/2011 1:32 PM, Greg Hormann wrote:
>> Ah, HD-PVR.  Such a cool device if I can get you to work with mythtv. :-)
>>
>> I have a new (Rev F1) device going into a mythtv 0.24 system.  I can
>> use "cat" to create a test file that is viewable via vlc.
>> Unfortunately, the Mythbacked throws and endless loop of "eno:
>> Resource temporary unavailable" errors when I to use it.  Also, after
>> myth is done, cat no longer works until I powercycle the HD-PVR
>> device.
>>
>> Using Mythbuntu 10.10 with 2.6.35-28 kernel.  I used the supplied
>> HD-PVR CD in a windows system to load the firmware (0x15 per logs).
>> Because my device was not recognized (new USB ID), I had to compile my
>> own v4l-dvb using the old mercurial repository as outlined
>> http://www.mythtv.org/wiki/Hauppauge_HD-PVR.  (I tired the new
>> media_build repository too, but hit some compilation errors I couldn't
>> resolve.)
>>
>> Everything works fine outside of myth. (IR Blasting, IR Receiving, and
>> cat /dev/video) so I'm stumped.  I know a number of folks have this
>> working, so I'd  love some guidance on what to try next.
>>
>> Thanks so much!
>> Greg
>>
>> ---------------------------------
>> Example
>> ---------------------------------
>>
>> $ cat /dev/video0>   test.ts
>> ^c
>> vlc test.ts<-- Nice 1080i video! Yea!
>>
>> Start up myth-backend; Record light on HD-PVR doesn't light up
>>
>> $ tail -f /var/log/mythtv/mythbackend.log
>> 2011-04-10 12:43:15.611 AnalogSM(/dev/video0), Error: Start encoding failed
>> 			eno: Resource temporarily unavailable (11)
>> 2011-04-10 12:43:15.961 AnalogSM(/dev/video0), Error: Start encoding failed
>> 			eno: Resource temporarily unavailable (11)
>> 2011-04-10 12:43:16.301 AnalogSM(/dev/video0), Error: Start encoding failed
>> 			eno: Resource temporarily unavailable (11)
>>
>> stop mythbackend
>>
>> <snipped>
> What do you this device setup as in mythtv-setup?
Lets try that again...

What do have this device setup as in mythtv-setup?  Card type should be 
"HDPVR", not v4l or mpeg.  Just a shot in the dark.

Andrew.