[mythtv-users] Backend setup for win-hvr-950Q
barry at trumpetsoftruth.com
Fri Jul 29 22:00:23 UTC 2011
Having read around I see that the hvr-950Q is supported
However I can not get it to work?
I have a new Ubuntu 11.04 install with hvr-950Q it is detected
[ 20.474944] Linux video capture interface: v2.00
[ 21.378889] tveeprom 0-0050: Hauppauge model 72001, rev B3F0, serial#
[ 21.378894] tveeprom 0-0050: MAC address is 00:0d:fe:5d:60:16
[ 21.378898] tveeprom 0-0050: tuner model is Xceive XC5000 (idx 150,
[ 21.378902] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital
[ 21.378905] tveeprom 0-0050: audio processor is AU8522 (idx 44)
[ 21.378908] tveeprom 0-0050: decoder processor is AU8522 (idx 42)
[ 21.378912] tveeprom 0-0050: has no radio, has IR receiver, has no IR
[ 21.378915] hauppauge_eeprom: hauppauge eeprom: model=72001
[ 21.466837] au8522 0-0047: creating new instance
[ 21.466840] au8522_decoder creating new instance...
[ 21.565429] i2c-core: driver [tuner] using legacy suspend method
[ 21.565433] i2c-core: driver [tuner] using legacy resume method
[ 21.565792] tuner 0-0061: chip found @ 0xc2 (au0828)
[ 21.826481] xc5000 0-0061: creating new instance
[ 21.831386] xc5000: Successfully identified at address 0x61
[ 21.831389] xc5000: Firmware has not been loaded previously
[ 21.832531] au8522 0-0047: attaching existing instance
[ 21.839732] xc5000 0-0061: attaching existing instance
[ 21.844510] xc5000: Successfully identified at address 0x61
[ 21.844513] xc5000: Firmware has not been loaded previously
[ 21.844517] DVB: registering new adapter (au0828)
[ 21.844521] DVB: registering adapter 0 frontend 0 (Auvitek AU8522
[ 21.847070] Registered device AU0828 [Hauppauge HVR950Q]
[ 21.847521] usbcore: registered new interface driver au0828
[ 22.104193] usbcore: registered new interface driver snd-usb-audio
[ 26.726638] xc5000: waiting for firmware upload
[ 26.825660] xc5000: firmware read 12401 bytes.
[ 26.825664] xc5000: firmware uploading...
[ 33.840013] xc5000: firmware upload complete...
When in the MythTV backend it come up /dev/video0 VBI /dev/vbi0
Default input Television
probed info Hauppauge HVR950Q [au0828]
Current Sources is set to us-cable ( Use brighthouse in Central
Florida) Not sure what the difference is between us-cable
us-cable-hrc and us-cable-irc is ???
Now when I try to scan I get nothing Yet I know the hvr is working. If
I connect it to my macbook then using EyeTV it works fine.
Please can someone help me set this up
Thanks In Advance
More information about the mythtv-users