[mythtv-users] Using devinput but devinput lircd.conf file does not contain all my remote buttons on Harmony One

[Gabe Rubin]

On Tue, Jun 14, 2011 at 7:42 PM, Gabe Rubin <gaberubin at gmail.com> wrote:
> On Thu, Jun 9, 2011 at 9:03 AM, Jarod Wilson <jarod at wilsonet.com> wrote:
>>
>> Hrm. What does 'ir-keytable' without any args spit back?
>>
>
> [root at localhost ~]# ir-keytable
> Found /sys/class/rc/rc1/ (/dev/input/event2) with:
>        Driver ir-kbd-i2c, table rc-rc5-tv
>        Supported protocols: RC-5
>        Enabled protocols:
>        Repeat delay = 500 ms, repeat period = 33 ms
>
>>
>>> I am obviously still doing something wrong.  I am still getting some
>>> activity in irw for some of the keypresses. but not the ones I had
>>> issues with previously (and all register in dmesg).  I am probably
>>> missing something obvious though.
>>
>> If the module has been loaded, then unloaded, then loaded again, it
>> would move the rc device to rc1 instead of 0. (back-tracking on the
>> device number can be complicated, for simplicity's sake, devno is
>> just always incremented when another instance is created).
>>
>>
>>> I changed "type: UNKNOWN" to "type: RC-5" although that line is
>>> commented out anyways, so I would not imagine it makes much of a
>>> difference (# table haupp, type: RC-5).
>>
>> I know it looks like just a comment, and its ugly, but ir-keytable
>> actually parses that and uses it to set the active protocol decoder.
>> That could use some work upstream...
>>
>>
>>> Do I need to edit my
>>> /etc/rc_maps.cfg?  I have posted it to
>>> http://www.mustbethemoney.mine.nu:8080/rc_map.txt  Maybe something is
>>> missing in that file?
>>
>> Interestingly, it doesn't seem there's a rule that would actually
>> load the haupp table in there. Providing a line to add will be easier
>> after seeing the ir-keytable no-args output though.
>
> Does the info I put up above help with creating a rule I can add?  I
> am not even certain that a rule would help though.  I rebooted using a
> more recent kernel (2.6.35.12-88.fc14.i686) and tried loading the
> specific haupp keytable but when I do that, irw recognizes no keys.
> This is what I did:
>
> When I do this, I get the following output:
> [root at localhost ~]#  ir-keytable -c -w /etc/rc_keymaps/haupp
> Old keytable cleared
> Wrote 46 keycode(s) to driver
>
>  If I unload and reload the ir-kbd-i2c module, irw will recognize the
> same keys it did when I originally loaded the module and not recognize
> the same keys it didn't recognize before (but dmesg is showing me that
> the system is recognizing all the keys).  Of course, if I try to load
> a keytable at that point, I get the error "Not found device rc0"
> because I have loaded it previously and as you noted, the rc device
> moved to rc1 instead of rc0.
>

One other thought I had is that maybe my lircd.conf file is not
correct.  I have pasted a copy here:
http://mustbethemoney.mine.nu:8080/lircd.conf