[mythtv-users] Problems Running Headless MBE/FE with Fedora 15/Gnome 3
Jason
umproko5 at gmail.com
Sat Oct 1 13:39:26 UTC 2011
On 09/20/2011 12:08 PM, Mache Creeger wrote:
> I recently upgraded my MBE/FE combo to Fedora 15 and am having
> problems running it headless. While it normally lives in my garage, I
> have the mythtv account autologin and gain access to the FE and
> desktop through VNC not to run video but to do various housekeeping
> tasks on the GUI. I have tried various xorg.conf configurations and
> either X will not load because it cannot find the right edid or when
> I can get X and Gnome to load and mythtv auto logs in, I get an error
> on the mythtv desktop that states "could not apply the stored
> configuration for monitors", "none of the selected modes were
> compatible with possible modes: CRTC 354: Trying mode..." and then a
> bunch of resolutions in the 50 to 57 Mhz range. The error messages
> interferes with my launching and running mythfrontend on the Gnome
> desktop. Listed below is my most recent /etc/X11/xorg.conf attempt
> with some of the last lines of /var/log/Xorg.0.log. Any ideas would
> be most appreciated.
>
> -- Mache
>
> # uname -r
> 2.6.40.4-5.fc15.x86_64
>
> # rpm -qa | grep mythtv-backend
> mythtv-backend-0.24.1-277.fc15.x86_64
>
> # cat /etc/X11/xorg.conf
>
> # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> # nvidia-xconfig: version
> 280.13 (buildmeister at swio-display-x86-rhel47-03.nvidia.com) Wed Jul
> 27 17:15:58 PDT 2011
>
> Section "ServerLayout"
> Identifier "Layout0"
> Screen 0 "Screen0" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> InputDevice "Mouse0" "CorePointer"
> EndSection
>
> Section "Files"
> ModulePath "/usr/lib64/xorg/modules/extensions/nvidia"
> ModulePath "/usr/lib64/xorg/modules/extensions"
> ModulePath "/usr/lib64/xorg/modules"
> FontPath "/usr/share/fonts/default/Type1"
> EndSection
>
> Section "InputDevice"
>
> # generated from default
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "Emulate3Buttons" "no"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "InputDevice"
>
> # generated from data in "/etc/sysconfig/keyboard"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbLayout" "us"
> Option "XkbModel" "pc105"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Unknown"
> ModelName "Unknown"
> # HorizSync 28.0 - 33.0
> # VertRefresh 43.0 - 72.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> Identifier "Device0"
> Driver "nvidia"
> Option "UseEDID" "FALSE"
> Option "UseDisplayDevice" "CRT"
> VendorName "NVIDIA Corporation"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Device0"
> Monitor "Monitor0"
> Option "NoLogo" "True"
> DefaultDepth 24
> SubSection "Display"
> Depth 24
> EndSubSection
> EndSection
>
> ; Last few entries to /var/log/Xorg.0.log
>
> [ 22.215] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
> [ 22.215] (II) Loading /usr/lib64/xorg/modules/libwfb.so
> [ 22.215] (II) Loading /usr/lib64/xorg/modules/libfb.so
> [ 22.226] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
> [ 22.226] (==) NVIDIA(0): RGB weight 888
> [ 22.226] (==) NVIDIA(0): Default visual is TrueColor
> [ 22.226] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 22.226] (**) NVIDIA(0): Option "NoLogo" "True"
> [ 22.226] (**) NVIDIA(0): Option "UseEDID" "FALSE"
> [ 22.226] (**) NVIDIA(0): Option "UseDisplayDevice" "CRT"
> [ 22.226] (**) NVIDIA(0): Ignoring EDIDs
> [ 22.941] (II) NVIDIA(GPU-0): Not probing EDID on CRT-1.
> [ 22.942] (II) NVIDIA(0): NVIDIA GPU GeForce 8400GS (GT218) at
> PCI:1:0:0 (GPU-0)
> [ 22.942] (--) NVIDIA(0): Memory: 1048576 kBytes
> [ 22.942] (--) NVIDIA(0): VideoBIOS: 70.18.76.00.02
> [ 22.943] (II) NVIDIA(0): Detected PCI Express Link width: 16X
> [ 22.943] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
> [ 22.943] (--) NVIDIA(0): Connected display device(s) on GeForce
> 8400GS at PCI:1:0:0
> [ 22.943] (--) NVIDIA(0): CRT-1
> [ 22.943] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
> [ 22.946] (II) NVIDIA(0): Option "UseDisplayDevice" "CRT"
> converted to "CRT-1".
> [ 22.946] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from
> the EDID has been
> [ 22.946] (**) NVIDIA(0): enabled on all display devices.
> [ 22.949] (II) NVIDIA(0): Assigned Display Device: CRT-1
> [ 22.949] (==) NVIDIA(0):
> [ 22.949] (==) NVIDIA(0): No modes were requested; the default
> mode "nvidia-auto-select"
> [ 22.949] (==) NVIDIA(0): will be used as the requested mode.
> [ 22.949] (==) NVIDIA(0):
> [ 22.949] (II) NVIDIA(0): Validated modes:
> [ 22.949] (II) NVIDIA(0): "nvidia-auto-select"
> [ 22.949] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
> [ 22.970] (WW) NVIDIA(0): Unable to get display device CRT-1's
> EDID; cannot compute DPI
> [ 22.970] (WW) NVIDIA(0): from CRT-1's EDID.
> [ 22.970] (==) NVIDIA(0): DPI set to (75, 75); computed from
> built-in default
> [ 22.970] (--) Depth 24 pixmap format is 32 bpp
> [ 22.970] (II) NVIDIA: Using 768.00 MB of virtual memory for
> indirect memory access.
> [ 22.975] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
> [ 22.997] (II) Loading extension NV-GLX
> [ 23.038] (==) NVIDIA(0): Disabling shared memory pixmaps
> [ 23.038] (==) NVIDIA(0): Backing store disabled
> [ 23.038] (==) NVIDIA(0): Silken mouse enabled
> [ 23.039] (**) NVIDIA(0): DPMS enabled
> [ 23.039] (II) Loading extension NV-CONTROL
> [ 23.039] (II) Loading extension XINERAMA
> [ 23.039] (II) Loading sub module "dri2"
> [ 23.039] (II) LoadModule: "dri2"
> [ 23.040] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
> [ 23.040] (II) Module dri2: vendor="X.Org Foundation"
> [ 23.040] compiled for 1.10.4, module version = 1.2.0
> [ 23.040] ABI class: X.Org Server Extension, version 5.0
> [ 23.040] (II) NVIDIA(0): [DRI2] Setup complete
> [ 23.040] (==) RandR enabled
> [ 23.040] (II) Initializing built-in extension Generic Event Extension
> [ 23.040] (II) Initializing built-in extension SHAPE
> [ 23.040] (II) Initializing built-in extension MIT-SHM
> [ 23.040] (II) Initializing built-in extension XInputExtension
> [ 23.040] (II) Initializing built-in extension XTEST
> [ 23.040] (II) Initializing built-in extension BIG-REQUESTS
> [ 23.040] (II) Initializing built-in extension SYNC
> [ 23.040] (II) Initializing built-in extension XKEYBOARD
> [ 23.040] (II) Initializing built-in extension XC-MISC
> [ 23.040] (II) Initializing built-in extension XINERAMA
> [ 23.040] (II) Initializing built-in extension XFIXES
> [ 23.040] (II) Initializing built-in extension RENDER
> [ 23.040] (II) Initializing built-in extension RANDR
> [ 23.040] (II) Initializing built-in extension COMPOSITE
> [ 23.040] (II) Initializing built-in extension DAMAGE
> [ 23.040] (II) SELinux: Disabled on system
> [ 23.041] (II) Initializing extension GLX
> [ 23.458] (II) config/udev: Adding input device Power Button
> (/dev/input/event1)
> [ 23.458] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 23.458] (**) Power Button: Applying InputClass "system-setup-keyboard"
> [ 23.458] (II) LoadModule: "evdev"
> [ 23.459] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.488] (II) Module evdev: vendor="X.Org Foundation"
> [ 23.489] compiled for 1.10.1, module version = 2.6.0
> [ 23.489] Module class: X.Org XInput Driver
> [ 23.489] ABI class: X.Org XInput driver, version 12.2
> [ 23.489] (II) Using input driver 'evdev' for 'Power Button'
> [ 23.489] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.489] (**) Power Button: always reports core events
> [ 23.489] (**) Power Button: Device: "/dev/input/event1"
> [ 23.489] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 23.489] (--) Power Button: Found keys
> [ 23.489] (II) Power Button: Configuring as keyboard
> [ 23.489] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
> [ 23.489] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
> [ 23.489] (**) Option "xkb_rules" "evdev"
> [ 23.489] (**) Option "xkb_model" "pc105+inet"
> [ 23.489] (**) Option "xkb_layout" "us"
> [ 23.489] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
> [ 23.523] (II) config/udev: Adding input device Power Button
> (/dev/input/event0)
> [ 23.523] (**) Power Button: Applying InputClass "evdev keyboard catchall"
> [ 23.523] (**) Power Button: Applying InputClass "system-setup-keyboard"
> [ 23.523] (II) Using input driver 'evdev' for 'Power Button'
> [ 23.523] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.523] (**) Power Button: always reports core events
> [ 23.523] (**) Power Button: Device: "/dev/input/event0"
> [ 23.523] (--) evdev: Power Button: Vendor 0 Product 0x1
> [ 23.523] (--) Power Button: Found keys
> [ 23.523] (II) Power Button: Configuring as keyboard
> [ 23.523] (**) Option "config_info"
> "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
> [ 23.523] (II) XINPUT: Adding extended input device "Power Button"
> (type: KEYBOARD)
> [ 23.523] (**) Option "xkb_rules" "evdev"
> [ 23.523] (**) Option "xkb_model" "pc105+inet"
> [ 23.523] (**) Option "xkb_layout" "us"
> [ 23.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event4)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event5)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event6)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.525] (II) config/udev: Adding input device HDA NVidia HDMI/DP
> (/dev/input/event7)
> [ 23.525] (II) No input driver/identifier specified (ignoring)
> [ 23.534] (II) config/udev: Adding input device AT Translated Set
> 2 keyboard (/dev/input/event2)
> [ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
> "evdev keyboard catchall"
> [ 23.534] (**) AT Translated Set 2 keyboard: Applying InputClass
> "system-setup-keyboard"
> [ 23.534] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
> [ 23.534] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.534] (**) AT Translated Set 2 keyboard: always reports core events
> [ 23.534] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
> [ 23.534] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
> [ 23.534] (--) AT Translated Set 2 keyboard: Found keys
> [ 23.534] (II) AT Translated Set 2 keyboard: Configuring as keyboard
> [ 23.534] (**) Option "config_info"
> "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
> [ 23.534] (II) XINPUT: Adding extended input device "AT Translated
> Set 2 keyboard" (type: KEYBOARD)
> [ 23.534] (**) Option "xkb_rules" "evdev"
> [ 23.534] (**) Option "xkb_model" "pc105+inet"
> [ 23.534] (**) Option "xkb_layout" "us"
> [ 23.534] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
> [ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
> Wheel Mouse (/dev/input/event3)
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass
> "evdev pointer catchall"
> [ 23.535] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
> [ 23.535] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: always reports core events
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event3"
> [ 23.535] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
> [ 23.535] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
> [ 23.535] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
> [ 23.535] (II) ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> [ 23.535] (**) Option "config_info"
> "udev:/sys/devices/platform/i8042/serio1/input/input3/event3"
> [ 23.535] (II) XINPUT: Adding extended input device "ImPS/2
> Generic Wheel Mouse" (type: MOUSE)
> [ 23.535] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping
> acceleration scheme 1
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration
> factor: 2.000
> [ 23.535] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
> [ 23.535] (II) config/udev: Adding input device ImPS/2 Generic
> Wheel Mouse (/dev/input/mouse0)
> [ 23.535] (II) No input driver/identifier specified (ignoring)
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
Hi,
Are you saying Gnome isn't starting hence not able to autologin?
/Jason
More information about the mythtv-users
mailing list