[mythtv-users] Hauppauge 2250 help?

[George Nassas]

On 2012-04-04, at 12:40 PM, Greg <greg12866 at nycap.rr.com> wrote:

> Can anyone point me in the right direction?

Below are log lines from a 2250 that does analog exclusively. The drivers are stock 2.6.39 Debian ones. I'm not sure if the extra firmware logging is due to Debian defaults or because you're missing the file. I do see your driver reporting a successful download. Anyway it's a data point.

- George

BOOT_IMAGE=/boot/vmlinuz-2.6.39-bpo.2-amd64

[    5.001212] saa7164 driver loaded
[    5.001282] saa7164 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.002119] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
[    5.002126] saa7164[0]/0: found at 0000:02:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfb800000
[    5.160870] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
[    5.184700] saa7164_downloadfirmware() firmware read 4019072 bytes.
[    5.184703] saa7164_downloadfirmware() firmware loaded.
[    5.184704] Firmware file header part 1:
[    5.184706]  .FirmwareSize = 0x0
[    5.184713]  .BSLSize = 0x0
[    5.184714]  .Reserved = 0x3d538
[    5.184715]  .Version = 0x3
[    5.184717] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[    5.184723] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[    5.184724] saa7164_downloadfirmware() BSLSize = 0x0
[    5.184726] saa7164_downloadfirmware() Reserved = 0x0
[    5.184728] saa7164_downloadfirmware() Version = 0x1661c00
[   12.021960] saa7164_downloadimage() Image downloaded, booting...
[   12.125668] saa7164_downloadimage() Image booted successfully.
[   14.846171] saa7164_downloadimage() Image downloaded, booting...
[   16.816742] saa7164_downloadimage() Image booted successfully.
[   16.861391] tveeprom 1-0000: Hauppauge model 88061, rev C4F2, serial# 7356229
[   16.861393] tveeprom 1-0000: MAC address is 00:0d:fe:70:3f:45
[   16.861395] tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
[   16.861398] tveeprom 1-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
[   16.861400] tveeprom 1-0000: audio processor is SAA7164 (idx 43)
[   16.861401] tveeprom 1-0000: decoder processor is SAA7164 (idx 40)
[   16.861403] tveeprom 1-0000: has radio, has IR receiver, has no IR transmitter
[   16.861404] saa7164[0]: Hauppauge eeprom: model=88061
[   17.192469] tda18271 2-0060: creating new instance
[   17.197357] TDA18271HD/C2 detected @ 2-0060
[   17.448468] DVB: registering new adapter (saa7164)
[   17.448471] DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[   17.730828] tda18271 3-0060: creating new instance
[   17.735339] TDA18271HD/C2 detected @ 3-0060
[   17.986572] tda18271: performing RF tracking filter calibration
[   20.329250] tda18271: RF tracking filter calibration complete
[   20.329862] DVB: registering new adapter (saa7164)
[   20.329864] DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
[   20.330145] saa7164[0]: registered device video0 [mpeg]
[   20.560247] saa7164[0]: registered device video1 [mpeg]
[   20.771016] saa7164[0]: registered device vbi0 [vbi]
[   20.771045] saa7164[0]: registered device vbi1 [vbi]
[   26.602188] tda18271: performing RF tracking filter calibration
[   28.973445] tda18271: RF tracking filter calibration complete
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20120404/49347623/attachment.html>