[mythtv-users] imon remote changes

Igor Cicimov icicimov at gmail.com
Tue Aug 14 13:19:52 UTC 2012


On Aug 14, 2012 4:57 PM, "Phil Wild" <phil at holobyte.com.au> wrote:
>
> Hi all,
>
> I am having issues with my imon remote configuration after upgrading
> to ubuntu 12.04 LTS
> Actually to clarify... Not an upgrade but a complete new install of my
frontend.
>
> I am running a Zotac ION board and have an Antec MicroFusion 350 case
> with inbuilt LCD and IR receiver.
>
> lsusb shows:
>
>      15c2:0038 SoundGraph Inc. GD01 MX LCD Display/IR Receiver
>
> I have read through the docs re changes required and have tried to
> follow instruction. Have spent all night googling as well.
>
> I am running a Harmony One remote with the profile set as an MCE USB
remote.
>
> My /etc/lirc/hardware.conf file is configured as follows:
>
> #Chosen Remote Control
> REMOTE="Linux input layer (/dev/input/eventX)"
> REMOTE_MODULES=""
> REMOTE_DRIVER="devinput"
This is dev/input in my setup as i remember
> REMOTE_DEVICE="/dev/input/by-id/usb-15c2_0038-event-if00"
Does this device exist?
> REMOTE_SOCKET=""
> REMOTE_LIRCD_CONF="devinput/lircd.conf.devinput"
> REMOTE_LIRCD_ARGS=""
>
> #Chosen IR Transmitter
> TRANSMITTER="None"
> TRANSMITTER_MODULES=""
> TRANSMITTER_DRIVER=""
> TRANSMITTER_DEVICE=""
> TRANSMITTER_SOCKET=""
> TRANSMITTER_LIRCD_CONF=""
> TRANSMITTER_LIRCD_ARGS=""
> START_LIRCD="true"
> LOAD_MODULES="false"
This should be true so the kernel modules get loaded
> LIRCMD_CONF=""
> FORCE_NONINTERACTIVE_RECONFIGURATION="false"
> START_LIRCMD=""
>
> My /etc/lircd.conf file contains
>
> #Configuration for the Linux input layer (/dev/input/eventX) remote:
> include "/usr/share/lirc/remotes/devinput/lircd.conf.devinput
>
And do you have the propper key hex codes for your remote in this file?
> ir-keytable returns the following:
>
> Found /sys/class/rc/rc0/ (/dev/input/event5) with:
>         Driver imon, table rc-imon-pad
>         Supported protocols: RC-6 other
>         Enabled protocols:
>         Repeat delay = 500 ms, repeat period = 125 ms
>
> irw and ir-keytable do not pick up anything from my remote. Where have
> I gone wrong?
Is lircd running at all?
$ /etc/init.d/lircd status
>
> Thanks in advance.
>
> Phil
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20120814/0f9dd905/attachment.html>


More information about the mythtv-users mailing list