[mythtv-users] mythfrontend is always hungry for ALSA Hardware audio buffer

Igor Cicimov icicimov at gmail.com
Fri Nov 9 01:29:54 UTC 2012


On Fri, Nov 9, 2012 at 9:26 AM, Josu Lazkano <josu.lazkano at gmail.com> wrote:

> 2012/11/8 Jean-Yves Avenard <jyavenard at gmail.com>:
> > On 9 November 2012 07:24, Andrey Zhunev <a-j at a-j.ru> wrote:
> >> Hello All,
> >>
> >>
> >> I just noticed that mythfrontend is asking to allocate a larger buffer
> for alsa:
> >> So I increased the value of /proc/asound/card0/pcm0p/sub0/prealloc to
> >> '1024' - even more than requested. Strangely, mythfrontend asked for
> more:
> >>
> >>
> >> 2012-11-09 00:10:18.681551 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:139 (TryOpenDevice) - ALSA: OpenDevice default
> >> 2012-11-09 00:10:18.683052 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:678 (SetParameters) - ALSA:
> SetParameters(format=10, channels=2, rate=48000, buffer_time=500000,
> period_time=4)
> >> 2012-11-09 00:10:18.683407 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:736 (SetParameters) - ALSA: Buffer size range
> from 2048 to 16384
> >> 2012-11-09 00:10:18.683421 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:739 (SetParameters) - ALSA: Period size range
> from 1024 to 1024
> >> 2012-11-09 00:10:18.683483 E [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:783 (SetParameters) - ALSA: Requested 500000us
> got 341333 buffer time
> >> 2012-11-09 00:10:18.683615 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:224 (IncPreallocBufferSize) - ALSA: Hardware
> audio buffer cur: 1024 need: 1536 max allowed: 32768
> >> 2012-11-09 00:10:18.683648 E [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:242 (IncPreallocBufferSize) - ALSA: Try to
> manually increase audio buffer with: echo 1536 | sudo tee
> /proc/asound/card0/pcm0p/sub0/prealloc
> >> 2012-11-09 00:10:18.683666 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:791 (SetParameters) - ALSA: Buffer time = 341333
> us
> >> 2012-11-09 00:10:18.683677 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:797 (SetParameters) - ALSA: Period time = 16
> periods
> >> 2012-11-09 00:10:18.683823 I [3892/3892] CoreContext
> audio/audiooutputalsa.cpp:806 (SetParameters) - ALSA: Buffer size = 16384 |
> Period size = 1024
> >
> > The way it works is this:
> >
> > We ask ALSA to allocate an audio buffer of a certain length. It
> > allocates some, and return how much it allocated.
> > If there's more than 10% difference between what was asked and what we
> > got, we display a message.
> > The hardware buffer sized suggested is calculated according to how
> > much the hardware buffer size currently is, and how much we got.
> >
> > So, say the HW buffer size is 128kB. We asked for 500ms buffer, and we
> > got 341ms instead. So myth assumes that we only got 341ms because the
> > HW buffer size was set to 128kB and that should it be higher, we would
> > have gotten more.
> > so we need: 500 * 128 / 341 = 187kB, we round it to the next 64kB
> > block, it will display that you need to increase the HW buffer to
> > 192kB...
> >
> > This works and is accurate for 99.9% of the ALSA setup in my experience.
> >
> > Now you're the 2nd person to report the problem above. No matter what
> > you ask ALSA, regardless of the HW memory buffer size, you always get
> > the same maximum value, is 341333us.
> > That throws off myth and the message displayed is incorrect.
> >
> > I would just ignore that message, it is not displayed unless you
> > increase the verbosity (it used to be displayed all the time)
> >
> > JY
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://www.mythtv.org/mailman/listinfo/mythtv-users
>
> Hello, I have same problem. I add this on the sudoer configuration file:
>
> myuser ALL=(ALL) NOPASSWD:/usr/bin/tee
> /proc/asound/card0/pcm3p/sub0/prealloc
>
> Now I can allocate the buffer size as mythfrontend user.
>
> But it doesnt change nothing:
>
> 1. I check the initial buffer size:
>
> $ cat /proc/asound/card0/pcm3p/sub0/prealloc
> 64
>
> 2. Change the buffer size:
>
> $ echo 192 | sudo tee /proc/asound/card0/pcm3p/sub0/prealloc
> 192
>
> 3. Check the buffer size:
>
> $ cat /proc/asound/card0/pcm3p/sub0/prealloc
> 64
>
> As you can see, it does not change the buffer size. I am doing something
> wrong?
>
> Thanks and best regards.
>
> --
> Josu Lazkano
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://www.mythtv.org/mailman/listinfo/mythtv-users
>

I use to put "buffer_size 4096" in my .asoundrc file for the digital device
I want to set specific buffer size.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.mythtv.org/pipermail/mythtv-users/attachments/20121109/89220463/attachment.html>


More information about the mythtv-users mailing list